|
Post by risolc on Sept 30, 2016 19:28:38 GMT 1
only just got both flywheel puller & clutch tool off Norbo this week,so if you want to borrow rather than buy PM. Arrow currently has my oil pump too & muttsnutts got the carbs Still not too sure about splitting the engine thoπ¬π¬
|
|
|
Post by risolc on Sept 29, 2016 19:16:57 GMT 1
That's great info- and looks better than the single insulated terminals that currently there.
|
|
|
Post by risolc on Sept 28, 2016 22:05:29 GMT 1
Just removed stator to put a new connector on the dodgy blade terminals on the white wires,whats the best alternative?
|
|
|
Post by risolc on Sept 6, 2016 22:30:10 GMT 1
Looks bad to me!!!! πππππ Love it.
|
|
|
Post by risolc on Sept 1, 2016 16:58:37 GMT 1
Very rare sight!!
|
|
|
Post by risolc on Jul 18, 2016 17:38:53 GMT 1
I have a Clarke 14 cfm compressor (V twin layout)with a 50 litre tank running a cheap blast cabinet,when in use the compressor is going constantly.
|
|
|
Post by risolc on Jun 23, 2016 16:49:16 GMT 1
Looking good-well as good as shed base can!!!!!ππ
|
|
|
Post by risolc on Jun 9, 2016 19:33:55 GMT 1
+1 with the best/fastest colours!!!! Up & down the street ?? I still pushing side to side in the shed? ? Probably just jealous!!!!!!
|
|
|
Post by risolc on Jun 1, 2016 20:23:12 GMT 1
+1 on need more staking/reinforcing Far better to go overkill at this stage than massive panic when pouring!
|
|
|
Post by risolc on May 30, 2016 20:03:06 GMT 1
Looks well like waiting for?
|
|
|
Post by risolc on May 24, 2016 21:55:59 GMT 1
Great news!!!! Will there be a list? Or readily available from your shop? If there's a list put me down.
|
|
|
Post by risolc on May 12, 2016 14:44:56 GMT 1
I started the ball rolling-Β£5 for air ambulance if nobody else joins in Good luck Risolc
|
|
|
Post by risolc on May 8, 2016 17:20:09 GMT 1
Dash looks superb-classic look modernised!!!! Great job
|
|
|
Post by risolc on Apr 24, 2016 21:26:18 GMT 1
Only 4K From what I remember hardly even started!
|
|
|
Post by risolc on Apr 24, 2016 19:14:59 GMT 1
20 MPG Must of been some head wind LOL
|
|
|
Post by risolc on Apr 23, 2016 20:08:39 GMT 1
don't why I am laughing doing mine up the shed how I going to get it down the garden steps thru the conservatory into the Back room then around a 90 degree into the hall and out the front door I not quite worked out but still I am some way off.
|
|
|
Post by risolc on Apr 23, 2016 19:20:33 GMT 1
Great idea in the spare room but once it's finished its a f***k*r to get down the stairs!!!!
|
|
|
Post by risolc on Apr 23, 2016 19:17:07 GMT 1
Makes it all worth while!!!!
|
|
|
Post by risolc on Apr 20, 2016 22:30:18 GMT 1
Hi kezza You're getting the idea of getting 10 posts with nothing to say! LoL
|
|
|
Project
Apr 20, 2016 21:53:19 GMT 1
Post by risolc on Apr 20, 2016 21:53:19 GMT 1
There's a nc30 single side swing arm and frame on EBay at the moment.
|
|
|
Post by risolc on Apr 15, 2016 16:37:57 GMT 1
+1 LOL
|
|
|
Post by risolc on Apr 14, 2016 19:12:11 GMT 1
Pressie arrived today-looks quality and at a reasonable price. Thanks
|
|
|
Post by risolc on Apr 12, 2016 20:36:30 GMT 1
Great skills on here!!!! I'm struggling with "simple things"
|
|
|
Post by risolc on Mar 20, 2016 21:28:52 GMT 1
Hi I used sol-X flex filler 3 in 1 rattle can after recommended on here, goes on great looks good but maybe you lose a little on definition.
|
|
|
Post by risolc on Mar 3, 2016 20:24:23 GMT 1
DO NOT SEND ANY FUNDS,MONEY!!! YOU WILL ALMOST DEFINITELY LOSE IT
|
|
|
Post by risolc on Feb 24, 2016 0:04:21 GMT 1
Sent mine to Wards-came back as good as new- photo on here and photo box somewhere but I still struggling with it. Think both wheels cost Β£160 plus postage each way but you have to work out price versus hours + Materials.
|
|
|
Post by risolc on Feb 16, 2016 22:51:56 GMT 1
Lol-but suppose cheap fix!!!!!!
|
|
|
Post by risolc on Feb 3, 2016 12:59:53 GMT 1
Was that what you went to look at in your last post? Bargain! I reckon I've already spent more without even looking at the engine yet
|
|
|
Post by risolc on Feb 1, 2016 22:27:45 GMT 1
Forgot to say in the master cylinder!!
|
|
|
Post by risolc on Feb 1, 2016 22:27:02 GMT 1
Is it possible to replace the viewing window? is the window part available? or shall I just get the best replacement I can? all advice appreciated
|
|