|
Post by doohanno1 on Sept 26, 2019 20:15:33 GMT 1
What's with user name change.?
|
|
|
Post by doohanno1 on Sept 25, 2019 18:23:15 GMT 1
Had the same issue on a tzr 250.. Wrapped a bit of ptfe tape around the sensor a pushed it home, worked great.. And of course don't fill it to the brim.ð
|
|
|
Post by doohanno1 on Sept 20, 2019 16:27:55 GMT 1
Unless you've done absolutely no research or had your head in a bucket for many years, you would never buy a petrol tank from India The tanks are made from those buckets..ð
|
|
|
Post by doohanno1 on Sept 19, 2019 21:26:18 GMT 1
Another fine example of work from " chip off the old block" tuning..
|
|
|
Post by doohanno1 on Sept 14, 2019 21:11:46 GMT 1
Are you ever down south.? A chap in Ashbourne, Co Meath does them.
|
|
|
Post by doohanno1 on Sept 13, 2019 21:07:59 GMT 1
.
|
|
|
31k panels
Sept 13, 2019 18:42:18 GMT 1
via mobile
Post by doohanno1 on Sept 13, 2019 18:42:18 GMT 1
Would you have a link by any chance.? The name is not working for me. Tks..
|
|
|
31k panels
Sept 13, 2019 18:06:01 GMT 1
via mobile
Post by doohanno1 on Sept 13, 2019 18:06:01 GMT 1
Any one know who's selling the " plastic" side panels for the above.. Tks..
|
|
|
Post by doohanno1 on Sept 6, 2019 18:28:13 GMT 1
I think you will like this!!!!
All the organs of the body were having a meeting, Trying to decide who was the one in charge. "I should be in charge," said the brain, "Because I run all the body's systems, so without me nothing would happen." "I should be in charge," said the blood, "Because I circulate oxygen all over so without me you'd all waste away." "I should be in charge," said the stomach," Because I process food and give all of you energy." "I should be in charge," said the legs, "because I carry the body wherever it needs to go." "I should be in charge," said the eyes, "Because I allow the body to see where it goes." I should be in charge," said the rectum, "Because I'm responsible for waste removal." All the other body parts laughed at the rectum And insulted him, So in a huff, he shut down tight. Within a few days, the brain had a terrible headache, The stomach was bloated, The legs got wobbly, The eyes got watery, And the blood was toxic.. They all decided that the rectum should be the boss . The Moral of the story? Even though the others do all the work... An Arse Hole is usually in chargeð
|
|
|
Post by doohanno1 on Sept 4, 2019 13:10:42 GMT 1
I bought one from this chap.. Sounds great over 70..
|
|
|
Post by doohanno1 on Aug 30, 2019 9:28:37 GMT 1
" rear view mirrors"
Is there any other type..ðĪŠ
|
|
|
Post by doohanno1 on Aug 30, 2019 9:25:56 GMT 1
Good point, 4L0 00's should have been castrated! There's a yam fix for those. " castrated"..at least we get a chance to put the balls back in.!! ð
|
|
|
Post by doohanno1 on Aug 28, 2019 23:21:44 GMT 1
A culchie! ha! welcome in bud. Or perhaps budet...going by the name.ðĪ
|
|
|
Post by doohanno1 on Aug 28, 2019 23:18:15 GMT 1
Heart valve = 3 strokes Power valve = 2 strokes. You can fix them all. Get well soon...ð
|
|
|
Post by doohanno1 on Aug 24, 2019 12:58:11 GMT 1
|
|
|
Post by doohanno1 on Aug 24, 2019 8:20:41 GMT 1
Geez ..just bin the Horrid things and buy a Fresh New set of Genuine Keihins and NEVER look back Yeah , i hear what your saying bare but to be honest i have a small sense of achievement after chasing down the problem and delighted with the results.. As for looking back , not much time now with the rate of knots the bike is going forward with..ð
|
|
|
Post by doohanno1 on Aug 23, 2019 21:45:08 GMT 1
Well with the balls now inserted and the jet cleaned it feels like i just got it tuned..some difference..Wheelies off the throttle and if i dip the clutch in second up she comes..Bog standard with tsa's Thanks for the advice and the balls Shaun...
|
|
|
Post by doohanno1 on Aug 23, 2019 18:00:12 GMT 1
Is the 3mm modified hole meant to have a tiny brass ball in it.?
|
|
|
Post by doohanno1 on Aug 22, 2019 22:24:43 GMT 1
Well Shaun it looks as if your hole is bigger than mine.. Mine is about 1.5 mm Confused.com
|
|
|
Post by doohanno1 on Aug 22, 2019 22:20:17 GMT 1
Yes, talking about 4l0..
|
|
|
Post by doohanno1 on Aug 22, 2019 21:12:17 GMT 1
And then scrape them putting them in..aaaaaahhhhhh. ðĄ
|
|
|
Post by doohanno1 on Aug 22, 2019 20:37:59 GMT 1
The infamous gummed up jet now clear.
|
|
|
Post by doohanno1 on Aug 22, 2019 20:03:57 GMT 1
Wire through jet.
|
|
|
Post by doohanno1 on Aug 22, 2019 20:02:44 GMT 1
...but enough about my personal problems... I recently sourced some "01" carbs for the lc which are currently getting refurbed. In the mean time i had another look at "00" carbs that are on the bike now.. I presumed these were the first generation carb as they didn't have any areldite over the jet hole.. Now i notice that they have the modified 3mm hole drilled into them but no areldite or brass ball..!!!! The bike has being running well bar the usual 5k rough spot that i thought was always there with the "00 " carb.. The bellmouth jet was blocked but have it clear now. So the question is, should i insert the brass balls now. ??
|
|
|
Post by doohanno1 on Aug 16, 2019 19:40:28 GMT 1
" Tried gen Yamaha and they were gloss and didn't fit that well.".
Well if they don't fit what will.??
|
|
|
Post by doohanno1 on Aug 14, 2019 20:22:12 GMT 1
It' s that plastic bag getting snagged..ðĪŠ
|
|
|
Post by doohanno1 on Aug 12, 2019 18:43:37 GMT 1
A firm called " Classic race replicas" sell these.
|
|
|
Post by doohanno1 on Aug 8, 2019 22:05:55 GMT 1
Names eh..
|
|
|
Post by doohanno1 on Aug 4, 2019 14:44:19 GMT 1
Now we're talking..
|
|
|
Post by doohanno1 on Jul 19, 2019 13:31:41 GMT 1
No fear of that happening my missus..
|
|