|
|
Post by 1250bandit on Aug 16, 2019 17:00:41 GMT 1
I'm struggling to find some handlebars for my 4L0, I've tried Norbo and they were a poor fit/quality so sent them back. Tried gen Yamaha and they were gloss and didn't fit that well.
So I'm thinking try and get chrome and have them powder coated but what are the correct measurements W H Length of original bars or if someone knows where to get get bars from Cheers
|
|
|
|
Post by oldelsieboy on Aug 16, 2019 17:52:06 GMT 1
I'm struggling to find some handlebars for my 4L0, I've tried Norbo and they were a poor fit/quality so sent them back. Tried gen Yamaha and they were gloss and didn't fit that well. So I'm thinking try and get chrome and have them powder coated but what are the correct measurements W H Length of original bars or if someone knows where to get get bars from Cheers
Apart from the gloss/satin finish there ain't a lot of difference between the original 4L0 bars & the superseded 55k. rdlccrazy.proboards.com/thread/43885/different-55k-26110-old-4l0OEB |
|
|
|
Post by 1250bandit on Aug 16, 2019 17:58:02 GMT 1
I found the knurling didn't fit the the clamps on the top yoke with the 55K bars
|
|
|
|
Post by jon on Aug 16, 2019 18:00:35 GMT 1
I'm struggling to find some handlebars for my 4L0, I've tried Norbo and they were a poor fit/quality so sent them back. Tried gen Yamaha and they were gloss and didn't fit that well. So I'm thinking try and get chrome and have them powder coated but what are the correct measurements W H Length of original bars or if someone knows where to get get bars from Cheers
I’ve got some chrome bars that came with an LC. No idea if they are for an LC but look in proportion. Very good condition from memory. I can check and take pictures if need be, and measure. I had assumed they were for a air cooled RD, but can not verify. Jon |
|
|
|
Post by 1250bandit on Aug 16, 2019 18:55:46 GMT 1
Jon PM sent
|
|
|
|
Post by doohanno1 on Aug 16, 2019 19:40:28 GMT 1
" Tried gen Yamaha and they were gloss and didn't fit that well.".
Well if they don't fit what will.??
|
|
|
|
Post by oldelsieboy on Aug 16, 2019 20:00:23 GMT 1
55K bars fit fine.   OEB |
|
|
|
Post by JonW on Aug 26, 2019 2:18:31 GMT 1
Im with OEB, while they are slightly different the 55K bars do fit well enough and are a lot better than the aftermarkets IME.
Youre unlikely to find 4L0 bars these days, although there has been a set at the Oldpartsshop on ebay for years, probably as the postage is silly.
|
|
kenelm
L plate rider.
Aspiring owner.
Posts: 33 
|
Post by kenelm on Aug 28, 2019 13:19:47 GMT 1
55K bars fit fine. OEB That's a nice bike  |
|
|
|
Post by stanlc7189 on Aug 28, 2019 21:55:37 GMT 1
LC's are one of the most beautiful bikes ever made. This one is stunning. Really nice. Love the Kenny Roberts colour scheme.
|
|
