|
Post by 500anorak on Feb 9, 2014 21:01:15 GMT 1
|
|
|
Post by 500anorak on Feb 9, 2014 17:54:47 GMT 1
No,like most of the 500 parts it has been nla for a long time. I have a look up tool on the RZ/RD500 Owners Group website if you want to check part numbers,see link www.rzrd500.com/parts/allentries.phpHere is a photo of the carb heat shields
|
|
|
Post by 500anorak on Feb 9, 2014 17:15:51 GMT 1
rhino wrote
Yamaha knew they had a problem with this and fitted this guide plate on the last model they made in 1985,the RZ500S
|
|
|
Post by 500anorak on Feb 9, 2014 14:30:59 GMT 1
|
|
|
Post by 500anorak on Feb 1, 2014 12:08:09 GMT 1
oldelsieboy wrote
That will be a shame and a big loss to the site,i have not been a member for long but your post are always helpful.
Please reconsider,don`t let a few people spoil it for you.
Steve
|
|
|
Post by 500anorak on Jan 27, 2014 21:27:05 GMT 1
|
|
|
Post by 500anorak on Jan 26, 2014 22:16:31 GMT 1
very nice
|
|
|
Post by 500anorak on Jan 26, 2014 22:13:02 GMT 1
Any more news?
|
|
|
Hello
Jan 26, 2014 22:07:43 GMT 1
Post by 500anorak on Jan 26, 2014 22:07:43 GMT 1
Welcome,looks great
|
|
|
Post by 500anorak on Jan 26, 2014 22:06:44 GMT 1
very nice,great find
|
|
|
Post by 500anorak on Jan 25, 2014 17:09:41 GMT 1
Nice one Norbo
|
|
|
Post by 500anorak on Jan 25, 2014 17:08:09 GMT 1
He is a great guy to deal with,you will have no problems with him.
|
|
|
Post by 500anorak on Jan 14, 2014 13:08:32 GMT 1
Can you send him a box?
|
|
|
Post by 500anorak on Jan 8, 2014 22:12:42 GMT 1
Nice
|
|
|
Post by 500anorak on Jan 8, 2014 21:57:36 GMT 1
Hi Xavier Your website has been very helpful for many people for years,keep up the good work! Cheers
|
|
|
Post by 500anorak on Jan 8, 2014 19:46:23 GMT 1
rhino wrote No not new, no longer available Was this the one owner 1GE on ebay?,if it is try and keep it as original as you can
|
|
|
Post by 500anorak on Oct 4, 2013 19:37:38 GMT 1
Looks like Denis is selling all his nos parts he has been collecting for nine years!!!!!!!!!!!!!!
|
|
|
Post by 500anorak on Sept 26, 2013 19:42:35 GMT 1
And fix that bowed seat Norbo!
|
|
|
Post by 500anorak on Sept 7, 2013 10:49:39 GMT 1
Sweet
|
|
|
Post by 500anorak on Aug 27, 2013 18:51:45 GMT 1
Check out the feedback!!!
Buyers Beware!! DO NOT BLIND BID.Veiwing Recommeded or ask LOTS of questions!! Buyer: Member ID welcome33 ( Feedback score of 510Purple star icon for Feedback score between 500 to 999) 06-Mar-13 12:41 YAMAHA RD350LC - 4LO MODEL - 1981/W REG - ++NO RESERVE++ (#251231020830) £4,540.00
|
|
|
Post by 500anorak on Aug 6, 2013 8:58:56 GMT 1
They seem to be £4/5k for a bike that needs restoring these days.There are a lot of parts on a 500, most of which are nla.
I am doing a nos restore on a pre-production 47x bike,here are some photos of the engine.The engine has run for less than an hour but after 30 years it needs bits replating.I am using nos parts where they are the same as the production bike.
|
|
|
Post by 500anorak on Aug 1, 2013 16:18:29 GMT 1
I don`t think he needs to drum up business,if your riding a 500 with over 20,000 miles on the cranks keep the clutch lever covered!
|
|
|
Post by 500anorak on Aug 1, 2013 8:09:13 GMT 1
It is not uncommon for upper crank bearings to fail at 20,000 miles.I have seen quite a few,even Stan Stephens mentions it in this magazine article.£1/2k for a engine rebuild using genuine gaskets and parts is about right.
Gearboxs are strong,i think bare is getting confused with the rg500.
|
|
|
Post by 500anorak on Oct 17, 2012 18:32:07 GMT 1
Hi Terry The Aussie 53g rz500 never had a rear grab rail
|
|
|
Post by 500anorak on Aug 19, 2012 19:23:20 GMT 1
|
|
|
Post by 500anorak on Aug 19, 2012 19:19:31 GMT 1
|
|
|
Post by 500anorak on Jul 3, 2012 14:48:05 GMT 1
Hi Norbo,how you getting on with the RZV?
|
|
|
Post by 500anorak on Jul 2, 2012 20:14:35 GMT 1
Nice find Andy
|
|
|
Post by 500anorak on Jul 2, 2012 20:10:46 GMT 1
Can you check the reg for the rd500?,A538MWD is a Merc.
|
|
|
Post by 500anorak on Jul 7, 2011 5:31:22 GMT 1
Sweet
|
|