|
Post by muzz350 on Feb 16, 2014 21:25:55 GMT 1
All the bits I haven't used are back in storage now so just waiting on paintwork and then put the tank what's on now into hibernation - got myself a few none motorbike projects for garage now ,one been making a 4 seated bike to go to pub on to stop me and mates falling off!!
|
|
|
Post by muzz350 on Feb 16, 2014 20:01:12 GMT 1
Its the same make as the one on the front Andy! Its a maxxis they came to me very very cheap so we will see
|
|
|
Post by muzz350 on Feb 16, 2014 13:45:25 GMT 1
Hi to you all ,I got a scanner for xmas and have been messing around with it and thought i would share a few with you first came the Honda MB5 ,Dog slow and after a home tune and blowing it up it grew a silver engine and chrome exhaust(honest dad its just a different colour engine!)-the h100 engine made it go like the way it looked should! then thanks to the 250 law i swapped it for this then i bought my LC and it had more colours than enough! yellow was the colour i bought it but the yellow cases was my handywork. then after coming off it got a rattle can job - which i was impressed with and a genuine fairing with all the bits which cost a tenner! had this as well - and still kept the x7! another rattle can effort inspired by the TZR colour scheme! and finally it whore these colours last time on the road mid 90s - till it lives again. and finally some random lcs from the British GP at Silverstone 1984
|
|
|
Post by muzz350 on Feb 16, 2014 13:24:22 GMT 1
Well the long slow build is finally seeing some light at the end of the tunnel! Got it out into the garden today and it lives! The tank is just a spare while Mark in Derby sprays my new set but it was good to hear the crackle of the pipes again! dog not happy been left inside but he is not marking his territory here! yes thats smoke from the pipes! just will need a bit of setting up when paintwork comes back in March.
|
|
|
Post by muzz350 on Dec 20, 2013 14:58:16 GMT 1
80 MM Norbo sells them in his shop.
|
|
|
Post by muzz350 on Nov 8, 2013 16:12:31 GMT 1
And not even a front mudguard stripe!
|
|
|
Post by muzz350 on Oct 29, 2013 20:01:37 GMT 1
Thanks for confirming Tone and Nuts
|
|
|
Post by muzz350 on Oct 29, 2013 18:58:40 GMT 1
Sorry yes its a 4lo and the only diagram I have its not that clear - its just I didn't remember it staying on in the far distant past!
|
|
|
Post by muzz350 on Oct 29, 2013 10:54:56 GMT 1
Morning all this will be a easy one for somebody, but should your front headlight parking lamp stay lit when then normal headlight is switched on? Cheers Muzz
|
|
|
Post by muzz350 on Oct 25, 2013 11:16:20 GMT 1
I have just used the grease gun method on my front calipers and even though they were well stuck in it moved them with ease - a bit messy so on the 2nd one i filled with engine oil first then pumped in the grease and it was a lot easier to clean up the caliper but keep plenty of rags handy!
|
|
|
Post by muzz350 on Oct 13, 2013 10:08:27 GMT 1
|
|
|
Post by muzz350 on Oct 7, 2013 20:23:16 GMT 1
You will be exhausted trying to find any better!
|
|
|
Post by muzz350 on Sept 13, 2013 20:20:08 GMT 1
Not as slow as mine but looks good mate and same colours as I am doing top job !
|
|
|
Post by muzz350 on Aug 20, 2013 9:31:14 GMT 1
I told you it would be a slow one - I think thats why my school reports used to say easily distracted! Sorry about quality of pics i took them with my tablet so will have to revert back to the camera if i can find it!
|
|
|
Post by muzz350 on Aug 19, 2013 11:49:56 GMT 1
Here is a couple of a 250 i had a few years ago
|
|
|
Post by muzz350 on Jul 18, 2013 15:04:56 GMT 1
|
|
|
Post by muzz350 on Jul 3, 2013 15:24:07 GMT 1
Put centre stand and side stand on and got it nice and high on the lift and fitted loom and battery box.
|
|
|
Post by muzz350 on May 23, 2013 15:32:04 GMT 1
Yet another happy customer superb service and communications I cannot recommend Arrow enough ;D
|
|
|
Post by muzz350 on Apr 19, 2013 9:32:31 GMT 1
Paid £57.08 with Bennetts through compare the market for a 1200 bandit fully comp - and got a free meerkat - ;D
|
|
|
Post by muzz350 on Apr 18, 2013 15:11:14 GMT 1
I have a set of Terry Beckett barrels as a spare set and they were raced by a bloke called Charlie Corner from Malton - i used them on the road with a modded airbox and allspeeds and they where very rideable and also quick for the day the pistons were well modded as well - last used in '94 but oiled and wrapped up now!
|
|
|
Post by muzz350 on Apr 18, 2013 14:57:37 GMT 1
|
|
|
Post by muzz350 on Apr 5, 2013 11:22:11 GMT 1
Had the diesel out last Saturday and did Sherburn and a bit of a local ride of around 50 miles but it got a bit chilly late afternoon but will try again this week.
|
|
|
Post by muzz350 on Mar 26, 2013 19:48:45 GMT 1
I must admit I thought they were more worthy winners of the best in show than the trike that won ! May I just say what a good group of lads (and lasses) you all are and me and my lad both enjoyed the weekend and one of them maybe up for a swap for a matching numbers 4lo or possibly one of Dave's hybrids ! ;D
|
|
|
Post by muzz350 on Mar 9, 2013 19:44:03 GMT 1
I would not use the marine oil for my bike its just that the place I get it from does 2 stroke for bikes as well _ sorry for any confusion .
|
|
|
Post by muzz350 on Mar 8, 2013 13:44:18 GMT 1
I have used this place for the last few years for marine 2 stroke for a Yamaha 85hp otboard and had no problems at all. I will probably look at using them once my bike is in need of a drink of oil ! www.lubetechshop.co.uk/index.php?cPath=22_35
|
|
|
Post by muzz350 on Mar 7, 2013 15:49:01 GMT 1
|
|
|
Post by muzz350 on Feb 19, 2013 18:23:54 GMT 1
Maplins do a good small one which I have used for carb parts.
|
|
|
Post by muzz350 on Feb 15, 2013 15:02:32 GMT 1
Welcome - Do you have horses as well? ;D
|
|
|
Post by muzz350 on Feb 13, 2013 16:49:00 GMT 1
It looks like the guy off the Chop Shop programme on the discovery channel called Leepu made them.
|
|
|
Post by muzz350 on Feb 13, 2013 12:30:35 GMT 1
|
|