|
Post by sandpiper on Apr 26, 2016 8:11:45 GMT 1
yes thats what i really meant to say, so really its not ypvs. i have a mk3 2hk with this engine fitted.ypvs blanked off for uk market.
|
|
|
RD125LC
Apr 24, 2016 16:39:16 GMT 1
Post by sandpiper on Apr 24, 2016 16:39:16 GMT 1
thermostst stuck, head gasket gone, cracked liner or head???
|
|
|
Post by sandpiper on Apr 24, 2016 8:57:55 GMT 1
i was recommended image works, ordered 5 sets and micron stickers, 4 sets arrived, only one of them is wrong and no micron stickers WTF.it might be a one off, going to call them monday will let you all know if he puts it right with no hassel.
|
|
|
Post by sandpiper on Apr 22, 2016 17:12:09 GMT 1
mk2 is 1gm mk3 is 2hk uk models, the uk did not get the ypvs engine.also mk1 10w and 12a
|
|
|
Post by sandpiper on Apr 20, 2016 14:17:57 GMT 1
hi guys going to be painting a yam 80lc in white guess yam used the same white in all there lcs anyone know a paint code for original or a best match please.
|
|
|
Post by sandpiper on Apr 16, 2016 19:12:13 GMT 1
when you pump the brake lever no fluid comes out the hole and if you put your thumb over it and pump there is no pressure or fluid coming out.
|
|
|
Post by sandpiper on Apr 16, 2016 8:09:54 GMT 1
hi guys if a two stroke has the correct compression could the crank case seals still be buggered. as i have an engine that has spark, fuel, but will not fire the timing is bang on. dont know what else to do other than set fire to it.
|
|
|
Post by sandpiper on Apr 14, 2016 17:26:12 GMT 1
|
|
|
Post by sandpiper on Apr 6, 2016 13:45:55 GMT 1
hi guys thanks for responses, it does start but pops and bangs and it wont rev out ??
|
|
|
Post by sandpiper on Apr 6, 2016 9:27:23 GMT 1
hi guys i know its not a yam but at least its a 2 stroke ! got a honda nsr125r was running fine then all of a sudden it started to back fire and wont stop back firing, took carb off stripped and ultrasonically cleaned, changed plug, checked for air leaks all ok, any one out there had this or know why a 2 stroke keeps backfiring any advice would be much appreciated before i go mad.
|
|
|
Post by sandpiper on Apr 6, 2016 9:19:18 GMT 1
hi guys restoring the above but struggling to find any info regarding the paint code any pointers much appreciated pete.
|
|
|
Post by sandpiper on Apr 5, 2016 9:50:01 GMT 1
thanks guys i will get my order in cheers pete.
|
|
|
Post by sandpiper on Apr 5, 2016 8:09:25 GMT 1
hi guys looking to purchase decals, anyone on here used the above, if so was you satisfied with the quality?? cheers pete.
|
|
|
Post by sandpiper on Apr 4, 2016 15:06:35 GMT 1
cheers thanks for replies lads
|
|
|
Post by sandpiper on Apr 4, 2016 10:09:47 GMT 1
hi guys got a micron fork brace and its stamped 54G anyone know what it fits please
|
|
|
Post by sandpiper on Apr 1, 2016 17:52:52 GMT 1
hi guys looking for someone to supply the above please
|
|
|
Post by sandpiper on Mar 29, 2016 8:55:40 GMT 1
hi gerumgoin i still have the bike tucked up in my collection shes a beaut
|
|
|
Post by sandpiper on Mar 28, 2016 9:36:31 GMT 1
hi got a yamaha F1 what exhausts would fit this model, are they all interchangable ie, n1, f2, all powervalves, any advice welcome guys
|
|
|
Post by sandpiper on Mar 26, 2016 18:44:32 GMT 1
private message sent to allspeed let me know if you cant recieve them ??
|
|
|
Post by sandpiper on Mar 26, 2016 18:27:20 GMT 1
PM sent
|
|
|
Post by sandpiper on Mar 26, 2016 18:16:18 GMT 1
yes anything can be for sale, where you located
|
|
|
Post by sandpiper on Mar 26, 2016 17:45:12 GMT 1
hi welcome, iam also in cornwall, if your looking for 125lc i have 10 also 125dx twin and a few others
|
|
|
Post by sandpiper on Mar 24, 2016 20:02:58 GMT 1
ive just painted a set of wheels and used 4mm pinstriping tape as it goes round corners easily, i polished the rim first.hope this helps.
|
|
|
Post by sandpiper on Mar 19, 2016 11:42:40 GMT 1
i have around 10 125lcs mk1 to mk3 some uk matching nos plus some imports, some fully restored, some original never been touched also some nice ones prices from £1500 to £3.5k
|
|
|
Post by sandpiper on Mar 15, 2016 13:04:19 GMT 1
awsome buddy well done
|
|
|
Post by sandpiper on Mar 6, 2016 16:49:15 GMT 1
hi guys going to be painting a standard exhaust on rd80lc is it satin black ?
|
|
|
Post by sandpiper on Mar 4, 2016 9:32:55 GMT 1
hi guys going to be painting my lc wheels, am i right thinking its satin black ??
|
|
|
Post by sandpiper on Mar 4, 2016 9:31:19 GMT 1
cheers guys
|
|
|
Post by sandpiper on Mar 3, 2016 19:31:32 GMT 1
using western union you have no control over the money once its gone its gone you never see it again steer clear its a con
|
|
|
Post by sandpiper on Feb 29, 2016 18:36:19 GMT 1
looking good and a very clever man all the best matt
|
|