|
Post by lrcarl on Jan 10, 2018 21:41:02 GMT 1
|
|
|
Post by lrcarl on Jan 8, 2018 16:59:22 GMT 1
Took me a while.code at top of screen when clicked on image not at side on photobucket page Carl Saying that just checked disappeared again?😔😔
|
|
|
Post by lrcarl on Jan 7, 2018 19:37:49 GMT 1
Just a little update, ive never ridden an LC and waited 30 years to do so. What can i say that you lot dont already know, what a riot this bike is ive never smiled and laughed so much in freezing, icy and salt covered roads. Heres to the spring time and hopefully my hybrid in the summer time Carnt be beaten for smiles per hour Carl
|
|
|
Post by lrcarl on Jan 5, 2018 18:49:20 GMT 1
Already at £78 9 days to go 😱
|
|
|
Post by lrcarl on Jan 3, 2018 21:50:07 GMT 1
Hi tony definitely a screwdriver looks like 3 good hits Carl
|
|
|
Post by lrcarl on Jan 3, 2018 21:41:11 GMT 1
That didn’t go well Mitaka web site 2 68mm pistons and liners £265 Carl
|
|
|
Post by lrcarl on Jan 3, 2018 21:38:07 GMT 1
ORE KIT (400cc) ALL PARTS FOR RD500 ALSO AVALABLE LINER 75.00 PISTON KIT (68mm) 42.75 RD250/350LC NEW CRANKSHAFT 342.47
2 LINERS FITTED & PISTON KITS SUPPLIED 265.50
|
|
|
Post by lrcarl on Jan 3, 2018 9:09:19 GMT 1
Read a thread on rz forum about this Was claimed banshee cases thicker and Will take trenching for +10 crank Ypvs cases max +7 crank Carl
|
|
|
Post by lrcarl on Jan 1, 2018 14:48:24 GMT 1
rubber mallet is what i use
|
|
|
2018
Dec 31, 2017 21:38:57 GMT 1
via mobile
Post by lrcarl on Dec 31, 2017 21:38:57 GMT 1
All the best guys Carl
|
|
|
Post by lrcarl on Dec 31, 2017 13:02:02 GMT 1
No question Steve Smith is the best batsman around But biggest factor of any home test series has to be the grounds men Carl
|
|
|
Post by lrcarl on Dec 21, 2017 19:22:35 GMT 1
Looks like too much play to me Carl
|
|
|
Post by lrcarl on Dec 20, 2017 21:36:08 GMT 1
Don’t like the way he tried to chisel out the Crank half ring.straight in with hammer and Screwdriver Carl
|
|
|
Post by lrcarl on Dec 15, 2017 11:12:47 GMT 1
You mean to say that you sold him a part, he complained they he didn't receive, gets a refund, then advertises the part for sale... Please tell me your joking. Wtf this prick needs a visit Carl
|
|
|
Post by lrcarl on Dec 11, 2017 18:47:02 GMT 1
Mmm think I prefer the original Modern retros not my thing Carl
|
|
|
Post by lrcarl on Nov 26, 2017 21:16:59 GMT 1
Well done mark sounds lovely Carl
|
|
|
Post by lrcarl on Nov 25, 2017 10:41:23 GMT 1
Styling don’t do it for me But 80kg/80bhp does Carl
|
|
|
Post by lrcarl on Nov 25, 2017 9:32:46 GMT 1
Scum bags hope they are caught But sadly cops won’t bother Carl
|
|
|
Post by lrcarl on Nov 24, 2017 21:59:54 GMT 1
Thought my phone was playing up Carl
|
|
|
Post by lrcarl on Nov 23, 2017 21:29:45 GMT 1
Sean, let me try and ask the question in a different way. If we refer to the aluminium coloured bit of the head as 'flat', is there a 5mm flat bit with carbon on before the head starts to angle? If so it's a 250 head. Jon +1 that’s what it looks like to me
|
|
|
Post by lrcarl on Nov 19, 2017 22:53:11 GMT 1
👍👍👍🤞🤞🤞
|
|
|
Post by lrcarl on Nov 19, 2017 8:54:57 GMT 1
RIP MALCOLM CARL
|
|
|
Post by lrcarl on Nov 18, 2017 18:13:34 GMT 1
Bargain for someone at 800 Carl
|
|
|
Post by lrcarl on Nov 16, 2017 20:43:53 GMT 1
2) they release the master cylinder 100% Just had this problem, it took me a while to figure it out as the whole braking system was new\refurbished could not figure out why it wouldn't bleed properly. Life saving info guys,got some for mine Carl
|
|
|
Post by lrcarl on Nov 15, 2017 19:22:10 GMT 1
Gutted for you,pics painful to look at Carl
|
|
|
Post by lrcarl on Nov 12, 2017 13:12:00 GMT 1
Don’t get it,who would want such a thing? Carl me for a start, ive got MS and cant ride anymore because i cant lift my feet off the floor onto the pegs [br Sorry to her that Sooner have a road registered banshee than that tho Carl
|
|
|
Post by lrcarl on Nov 12, 2017 10:27:13 GMT 1
Are they for your modded stock head? Carl
|
|
|
WHY???
Nov 11, 2017 12:11:39 GMT 1
via mobile
Post by lrcarl on Nov 11, 2017 12:11:39 GMT 1
Don’t get it,who would want such a thing? Carl
|
|
|
Post by lrcarl on Nov 11, 2017 11:43:23 GMT 1
Nice work looks spot on as is Carl
|
|
|
YPVS N1
Nov 6, 2017 21:47:31 GMT 1
via mobile
Post by lrcarl on Nov 6, 2017 21:47:31 GMT 1
Nice black n1 best pv for me Carl
|
|