|
Post by stusco on Apr 24, 2021 19:16:08 GMT 1
Whipped the top end off the gamma and sent them to Mark Dent for a tune
|
|
|
Post by midlifecrisisrd on Apr 24, 2021 19:38:53 GMT 1
Whipped the top end off the gamma and sent them to Mark Dent for a tune Jeez, that didn't stay together long ๐ค Need more horses? Steve
|
|
|
Post by stusco on Apr 24, 2021 19:57:26 GMT 1
Yeah its pants compared to the lc
|
|
|
Post by midlifecrisisrd on Apr 24, 2021 20:03:05 GMT 1
Bummer ๐ฌ
Steve
|
|
|
Post by trappena on Apr 25, 2021 17:59:58 GMT 1
Whipped the top end off the gamma and sent them to Mark Dent for a tune Taking the 460cc route?
|
|
|
Post by stusco on Apr 25, 2021 18:47:12 GMT 1
Its already had a 460
|
|
avb
Thrash Merchant
andys vapour blasting
Posts: 389
|
Post by avb on Apr 25, 2021 20:43:21 GMT 1
Ride round the peak district Perfect weather. Bike rode lovely
|
|
busby
Weekend rider
RD 350 4l0
Posts: 87
|
Post by busby on Apr 26, 2021 18:54:23 GMT 1
Tried adjusting the clutch, the lock nut is rock solid.
|
|
|
Post by hicky375 on Apr 26, 2021 21:13:51 GMT 1
Been getting some miles done running the bike in after a top end re build. Called in at our kids for a brew and took a quick pic. Wayne.
|
|
|
Post by andy748 on May 2, 2021 22:02:18 GMT 1
|
|
jam911
Thrash Merchant
Posts: 376
|
Post by jam911 on May 2, 2021 22:13:15 GMT 1
Did 30 miles of initial running in.
Put a new mirrors on it and found out that the clutch side mirror holder's thread is stripped.
Spent hours trying to get a genuine seat to fit properly...
|
|
|
Post by deano4lo on May 3, 2021 15:09:20 GMT 1
Fitted new clutch cable to the ypvs
|
|
|
Post by Chewie01 on May 3, 2021 15:46:08 GMT 1
Took my F2 out for a bit of a spin today without realising it was on reserve and ended up running out of petrol, like a complete bell end. Fortunately I was only about a mile and a bit away from a petrol station so ended up pushing it to fill it back up again.
|
|
|
Post by firmstools on May 3, 2021 17:58:35 GMT 1
Took my F2 out for a bit of a spin today without realising it was on reserve and ended up running out of petrol, like a complete bell end. Fortunately I was only about a mile and a bit away from a petrol station so ended up pushing it to fill it back up again. I did that last year Pushed it back about a mile as I remember going past a petrol station a few mins before. Several hours later when I was going again I came across a fuel stop just round the corner from where I ran out!
|
|
|
Post by dougw on May 6, 2021 16:23:06 GMT 1
Made up some stainless spacers for the tail unit and fitted the grab rail.
|
|
|
Post by elsiefan on May 9, 2021 17:22:56 GMT 1
Went for a nice blast through the local lanes and up to the Hill, met a mate for a cup of splosh, a bacon roll and a chin wag ๐
|
|
|
Post by tacky1 on May 9, 2021 17:27:17 GMT 1
Bought a new Dodge Ram Rebel 3,0 turbo diesel to pick up parts for the 350
|
|
|
Post by urbantangleweed on May 9, 2021 22:12:47 GMT 1
Refurbed 1 fork leg, another manky one to do.
|
|
|
Post by dougw on May 11, 2021 21:47:32 GMT 1
Uneven transfer ports sorted , barrels back on today. Need to finish making a copper head gasket before bolting head back on. ( aiming for squish of just over 1mm)
|
|
|
Post by steve h on May 11, 2021 21:51:43 GMT 1
Caught myself on its ruddy handle bars again, nearly had me over. One of these days I'll kick it's f**king tank in.... the tยฃat...
|
|
|
Post by nomoreheros on May 11, 2021 22:43:57 GMT 1
Thought I'd start stripping my 31k and take the exhausts of but didn't get far....2 cylinder nuts stuck solid and one nut rounded off ๐ญ
|
|
|
Post by 525bri on May 13, 2021 22:42:24 GMT 1
Almost finished the big bore Banshee engine for the TZr project, just need to fit the high flow impeller and Arrows oil pump to the cltch casing and it's ready for Mutts to weave his magic in June for the fabrication side of things into the frame. Andy. IMG_4229 by Andrew Jolly, on Flickr IMG_4231 by Andrew Jolly, on Flickr IMG_4230 by Andrew Jolly, on Flickr IMG_4232 by Andrew Jolly, on Flickr Surely this should be a thread Andy?
|
|
|
Post by andy748 on May 14, 2021 9:39:24 GMT 1
Will start a thread on the above once Dave weaves his magic! Andy.
|
|
|
Post by andy748 on May 15, 2021 20:52:46 GMT 1
Painted me clutch cover and various bits, don't have to mint as they will live behind a fairing, fitted a Norbo hi-flow impeller and a newly re-furbed Arrow oil pump (Thanks mate), engine is now done bar swapping the stator and flywheel off me spare engine, happy with how it's turned out. Andy. IMG_0027 by Andrew Jolly, on Flickr IMG_0030 by Andrew Jolly, on Flickr IMG_0029 by Andrew Jolly, on Flickr
|
|
|
Post by yamnewbie on May 15, 2021 22:00:16 GMT 1
Fitted a refurbed wiring loom, wish I never bothered as got more problems now,than I had in the first place,electrics is not my strong point.
|
|
|
Post by urbantangleweed on May 16, 2021 16:39:57 GMT 1
Finished refurbing a pair of forks and got them fitted onto my F2
|
|
|
Post by dougw on May 16, 2021 19:46:02 GMT 1
Head back on the 350lc, warmed up, no leaks, sounds very mechanically quiet and nice and crisp. Re torque and test ride tomorrow.
|
|
|
Post by stevel1305 on May 16, 2021 21:03:38 GMT 1
Fitted a lock kit to my 250lc today, all on one key now - quite an easy job even though I donโt possess the fingers of Fu Manchu!
|
|
|
Post by rbridd on May 17, 2021 17:02:54 GMT 1
Today I replaced the seals on my brake caliper. (RD250LC project bike)
|
|
|
Post by dougw on May 21, 2021 20:20:47 GMT 1
Fitted the Arrow (cheers Gary) rebuilt oil pump and bled it up.If its not pissing down all weekend hope to get a good chunk more running in miles done on the nicely finished by Trick Tuning barrels.
|
|