|
Post by philmill on Jan 12, 2021 16:53:29 GMT 1
I'll have to get it off the bench and see how the steering is I guess. More problems, now, the Venhill Build your own hoses kit I used has a leak on one hose, I read they can be a bugger and all it need is one stand of the wire to catch inside and you have a leak.. well I clearly got a strand. Not having a good day.
Phil
|
|
|
Post by philmill on Jan 12, 2021 12:41:16 GMT 1
Guys, how have you run the loom under the yoke on your Hybrids? Iโve got RGV yokes etc but not sure this is going to be right, should I run the brake hose over the top of the loom?? Thanks, Phil
|
|
|
Post by philmill on Jan 11, 2021 17:17:00 GMT 1
Thanks Steve, I just dropped them an email.
Phil
|
|
|
Post by philmill on Jan 11, 2021 16:44:50 GMT 1
Thanks Steve, I wondered if it was the one with the long metal bar but obviously not. I'll look for a new one like that.
Phil
|
|
|
Post by philmill on Jan 11, 2021 16:14:51 GMT 1
Guys, can anybody show me a pic of the correct rear stop light switch for the 31k, there are a few styles on eBay so not sure which one to buy.
Thanks, Phil
|
|
|
Post by philmill on Jan 11, 2021 16:03:00 GMT 1
Hi Guys, anybody know how much is taken off when they rechrome? I ask because I have a pair of DT175 forks which are badly pitted so not sure if they can be done, replacement stanchions seems not to be an option as they are rocking horse poo!
Also, are there other companies or just Philpotts??
Phil
|
|
|
Post by philmill on Jan 5, 2021 17:11:09 GMT 1
Raised works for me too, that looks amazing.
Phil
|
|
|
Post by philmill on Jan 5, 2021 15:30:16 GMT 1
Love it, liking the gold wheels too.
Phil
|
|
|
Post by philmill on Jan 3, 2021 17:48:14 GMT 1
Put me down for a YPVS one too please.
Phil
|
|
|
Post by philmill on Dec 28, 2020 20:27:09 GMT 1
I like the clocks, and the thinking for the left and right idiot lights. I ended up putting two small LEDS in the original bulb holder and wired them in, a lot of hassle and I would have done what you've done if I'd thought of it. Phil
|
|
|
Post by philmill on Aug 12, 2020 9:01:00 GMT 1
Going to be another thing of beauty, exactly what Ive come to expect from anything you do Dusty....
Phil
|
|
|
Post by philmill on Aug 4, 2020 8:58:17 GMT 1
I'm fairly sure you can have it dceleivered to the ferry and they will load and unload it, or at least they used to. Worth a call. I have done this before.
Phil
|
|
|
Post by philmill on Aug 3, 2020 19:08:30 GMT 1
Thanks Steve, I'll try that this week, the PV seems to be cycling ok but will check that.
Phil
|
|
|
Post by philmill on Aug 3, 2020 10:34:57 GMT 1
Ok, sorry to be reviving this thread but having now tried 2 tachos and neither work so I need to find a way to either test the tacho or the supply?? cant see I have 2 that dont work....
Thanks, Phil
|
|
|
Post by philmill on Jul 26, 2020 11:11:17 GMT 1
Its red writing, I cant remember if it the one from you Steve, I think not, that had a faded needle, I guess I'll be using it now though. I guess I'll be pulling the clocks off again today and swap the tacho, that way I'll know if its the tacho or the wiring....
Phil
|
|
|
Post by philmill on Jul 24, 2020 16:24:33 GMT 1
Black faced one Steve. Is there a way to test??
Phil
|
|
|
Post by philmill on Jul 24, 2020 16:05:05 GMT 1
Is there a way to test a tacho? mine appears not to work. Thanks for the info on the battery John, mine is a new battery so should be that causing the issue.
Phil
|
|
|
Post by philmill on Jul 24, 2020 15:26:05 GMT 1
Found it on the PV controller, thanks will try it now.
|
|
|
Post by philmill on Jul 24, 2020 15:23:33 GMT 1
Thanks Steve, so that not on that block? is it on the block coming up from the motor somewhere?
Phil
|
|
|
Post by philmill on Jul 24, 2020 15:18:05 GMT 1
Or is it one of these on the CDI?
|
|
|
Post by philmill on Jul 24, 2020 15:12:20 GMT 1
Hi all, so having added the later electronic tacho on my 31k can somebody tell me which wire I need to connect the grey wire from the tacho to? My meme pry seems to think itโs the wire on the coil but thought Iโd check before I do it! Thanks, Phil Not sure where that typo came from... damn correcting text on my phone....
|
|
|
Post by philmill on Jul 24, 2020 15:11:07 GMT 1
Hi all, so having added the later electronic tacho on my 31k can somebody tell me which wire I need to connect the grey wire from the tacho to? My meme pry seems to think itโs the wire on the coil but thought Iโd check before I do it! Thanks, Phil
|
|
|
Post by philmill on Jul 24, 2020 8:32:08 GMT 1
All those shiny bits, I love that part too. going to be another awesome build.
Phil
|
|
|
Post by philmill on Jul 23, 2020 8:22:40 GMT 1
Hi All, does anybody know if I can use a 4LO side stand (Metchamex) on my 31K, I'd like to buy the one Veg has for sale but not sure if it will fit, and not hit the pipes which are Mutt's pipes. Any help appreciated....
Phil
|
|
|
Post by philmill on Jul 22, 2020 9:00:18 GMT 1
Amazing just amazing, it looks perfect to me, well done.
Phil
|
|
|
Newbe
Jul 22, 2020 8:57:01 GMT 1
Post by philmill on Jul 22, 2020 8:57:01 GMT 1
Welcome, enjoy the forum, a lot of good info here and some very helpful people. So your forum name, is it as obvious as it looks??
Phil
|
|
|
Post by philmill on Jun 21, 2020 7:25:27 GMT 1
I just ordered one, they look like can be used a few times for sure.
Thanks, Phil
|
|
|
Post by philmill on Jun 20, 2020 7:12:44 GMT 1
Yambits sell one, defo a pic on there Phil Thanks Jon, will look there.
|
|
|
Post by philmill on Jun 19, 2020 11:06:39 GMT 1
Hi guys, anybody got a picture of a suitable extractor to pull the flywheel off my 500? having seen one I can either try and buy one or make one.
Thanks, Phil
|
|
|
Post by philmill on May 31, 2020 20:17:31 GMT 1
Fantastic write up, love it. Just hope the needle doesn't break like my N1 did, I've just ordered a TZR125 speedo to see it it will fit. Tacho needles are not the same size as I now know. Phil You should have said, I probably had a spare N needle Steve Cheers Steve, if it doesn't fit i'll give you a shout. Phil
|
|