|
|
Post by alankelly on Jan 3, 2021 16:24:19 GMT 1
Hi All Looking to maybe manufacture some custom horn covers🤔🤔 Just had a play with Logan on his new dual extrusion printer using John’s BEET horn cover as a test program and looks pretty cool😎 This example is in blue and white materials   Thinking the horn covers will be in black with a white logo of your choice (YPVS RDLC Yamaha) logo etc and cost would be around £20 posted Or if anybody want something completely in another colour this could be an option too but may involved a little more cost Obviously I will first model the first examples for review in black and white but would like to gauge what interest there would be Catch up soon Best wishes Al and Logan |
|
|
|
Post by midlifecrisisrd on Jan 3, 2021 16:27:50 GMT 1
Id take a YPVS one
Black with white would be fine but black with red YPVS 😍
Pleeeaaaase 😀
Steve
|
|
|
|
Post by tipfinchy on Jan 3, 2021 16:34:57 GMT 1
Id take a YPVS one Black with white would be fine but black with red YPVS 😍 Pleeeaaaase 😀 Steve same as Steve please Alan thanks mart |
|
|
|
Post by alankelly on Jan 3, 2021 16:39:58 GMT 1
This type logo may be an option too  |
|
|
|
Post by tipfinchy on Jan 3, 2021 16:54:22 GMT 1
This type logo may be an option too that would look good too , i might need more than one now  mart |
|
|
|
Post by Gunny on Jan 3, 2021 17:28:47 GMT 1
I`d take an Lc one like that, This type logo may be an option too |
|
|
|
Post by philmill on Jan 3, 2021 17:48:14 GMT 1
Put me down for a YPVS one too please.
Phil
|
|
|
|
Post by geoffb on Jan 3, 2021 18:02:28 GMT 1
Nice and I am definitely interested in one with RDLC on it. 👍
|
|
|
|
Post by JonW on Jan 3, 2021 22:50:13 GMT 1
Wow, that looks amazing Al. Superb work. I'd say the time between xmas and NY was a productive time for you, not many who can say that!
|
|
|
|
Post by alankelly on Jan 3, 2021 23:20:30 GMT 1
Hi Jon
You know me like to keep busy
Also wanted to understand how to do a dual extrusion print
Best wishes Al
|
|
|
|
Post by lc350pete on Jan 4, 2021 9:03:55 GMT 1
Id take a YPVS one Black with white would be fine but black with red YPVS 😍 Pleeeaaaase 😀 Steve Me too black with red YPVS 😀😀👍👍 |
|
|
|
Post by Dangerous on Jan 4, 2021 9:52:47 GMT 1
Put me down for a rdlc in black, red writing if possible👍 if not white will be fine.
|
|
|
|
Post by headcoats on Jan 4, 2021 10:28:03 GMT 1
Alans are great but if you need a replica black plastic one, they have started to appear on flebay again
|
|
|
|
Post by yamman1066 on Jan 4, 2021 10:38:05 GMT 1
yambits do them now £6 i think
|
|
|
|
Post by alankelly on Jan 4, 2021 23:01:39 GMT 1
Hi all Ok what does everybody think please for the first concept for a black horn cover with a red YPVS logo The logo is raised 1mm above a black horn cover “base blank”    Or do you want the logo sub flush below the horn cover top by 1mm. or again a third option is to have the logo flush with the top surface like this so it is easy to clean as there is no crevices to hold dirt?  Obviously this is a first concept with the other designs to follow hopefully later in the week but wanted to “test the water” with the first concept review to see if people want the logo raised, sub flush or level with the front surface Any comments welcome as long as they are nice ones Best wishes and stay safe Al |
|
|
|
Post by midlifecrisisrd on Jan 4, 2021 23:16:20 GMT 1
Hubba, hubba 😍😍😍
Slightly raised
Steve
|
|
|
|
Post by headcoats on Jan 4, 2021 23:20:21 GMT 1
raised
|
|
|
|
Post by JonW on Jan 4, 2021 23:20:42 GMT 1
Love this! How damn cool.
|
|
|
|
Post by alankelly on Jan 4, 2021 23:21:12 GMT 1
Hubba, hubba 😍😍😍 Slightly raised Steve Hi Steve How much by Maybe 0.5mm? And slightly raised make the print process easier too🙂 Best wishes Al |
|
|
|
Post by midlifecrisisrd on Jan 4, 2021 23:23:14 GMT 1
That would be perfect
Just enough to make it 3d rather than just a decal stuck on 👍
Steve
|
|
|
|
Post by lc350pete on Jan 5, 2021 10:46:50 GMT 1
That looks perfect, slightly raised please 😀
|
|
|
|
Post by philmill on Jan 5, 2021 17:11:09 GMT 1
Raised works for me too, that looks amazing.
Phil
|
|
|
|
Post by andy748 on Jan 5, 2021 20:42:02 GMT 1
Hi Al, Put me down for a Red YPVS one please. Cheers, Andy.
|
|
|
|
Post by Dangerous on Jan 6, 2021 12:30:34 GMT 1
definitely raised AL, looks amazing👍👍
|
|
|
|
Post by mannanan on Feb 3, 2021 11:27:34 GMT 1
Sorry, only just catching up on posts, they look brilliant. My preference is red YPVS raised. Excellent work Al.
|
|
|
|
Post by alankelly on Feb 7, 2021 12:33:55 GMT 1
Hi all Ok Logan tried to print this horn cover last night Really pleased with the first attempt but its not 100% to my liking for cosmetic looks and it did lift slightly of the build plate during the print process   Off now to both tweak the model and solve the print issue (replace the current bed supplied with the printer with a glass bed) and then will give it another go Catch up soon Best wishes Al |
|
|
|
Post by midlifecrisisrd on Feb 7, 2021 12:46:29 GMT 1
Oh you tease 🤣
Steve
|
|
|
|
Post by alankelly on Feb 7, 2021 18:35:58 GMT 1
Hi all Ok to put Steve out of his misery sorted all the niggles and printed another one I know it’s not a PV bike but looks pretty damn cool😎      And now Logan has got his enthusiasm back we will start to sort orders out for those that has requested the YPVS type and will look to start modelling up one for the non PV crowd Cost will be £20 but that will include 1st class post which I think is reasonable and all funds this time are going to Logan and not me☹️☹️ In the meantime any questions please feel free to ask Catch up soon and sorry for the delay with this project Stay safe all Al and Logan |
|
|
|
Post by alankelly on Feb 10, 2021 22:15:57 GMT 1
And today’s favourite colour is white😁😁  Best wishes Al |
|
|
|
Post by tipfinchy on Feb 13, 2021 13:46:51 GMT 1
Thanks Al Mart   |
|
