|
Post by headcoats on Mar 18, 2024 10:47:26 GMT 1
Long bolt and large washers every time to pull it in The sharp shocks is what distorts them And stop being lazy, part number is on Fowlers website π€‘ Steve π€£ Got it off Legend's websiteπππ 93315-11720
|
|
|
Post by headcoats on Mar 18, 2024 9:10:38 GMT 1
They are so delicate aren't they. Does anyone have the part number for bearing please? Did hear the aftermarket ones are wrong size ??
|
|
|
Post by headcoats on Mar 17, 2024 23:29:02 GMT 1
Just spent an eternity removing the clutch arm needle bearing ... Did one about 15 years ago and vowed never to do another ,but this one was fecked from vapour blasting which was done before I bought them.
Tried the rawl bolt method and a heatgun but wasn't having it and was worried I would crack the cases over tightening to get it to grip. Only got it out when the inner cage disintegrated and it left a lip on top of the outer sleeve and I got a sharp edged screwdriver and a couple taps it popped out ! Question now as these bearings are pretty delicate,what is best way to put a new one in ?? If I remember I think I heated the cases and tapped it in using a socket but slept since π΄
|
|
|
Post by headcoats on Mar 17, 2024 20:30:14 GMT 1
|
|
|
Post by headcoats on Mar 16, 2024 20:08:15 GMT 1
Personally I take as much off as in top end,clutch,flywheel etc and do the same when putting it back in Engine is easier to bolt things onto when in frame as doesn't try and move about ,especially when tightening the clutch and flywheel nuts
|
|
|
Post by headcoats on Mar 15, 2024 18:59:38 GMT 1
|
|
|
Post by headcoats on Mar 15, 2024 11:35:01 GMT 1
|
|
|
Post by headcoats on Mar 15, 2024 11:29:44 GMT 1
|
|
|
Post by headcoats on Mar 15, 2024 9:23:43 GMT 1
So frustrating when everyone knows who these funts are including the police and they just carry on
|
|
|
Post by headcoats on Mar 14, 2024 21:39:04 GMT 1
Olds still doing the Punk noise π€©
|
|
|
Post by headcoats on Mar 14, 2024 19:13:40 GMT 1
|
|
|
Post by headcoats on Mar 14, 2024 15:46:58 GMT 1
|
|
|
Post by headcoats on Mar 13, 2024 11:05:20 GMT 1
Living isle of wight is just as bad π±
|
|
|
Post by headcoats on Mar 12, 2024 9:17:49 GMT 1
Needs playing on big fookin speakers π to hear that basss
|
|
|
Post by headcoats on Mar 11, 2024 10:35:08 GMT 1
For the first time since registering them as historic vehicles, i taxed two of my LC's for free! Which was nice! Mouse Just did the same on the red LC π€ Got to wait till April for the yellow one π
|
|
|
Post by headcoats on Mar 10, 2024 15:40:44 GMT 1
Only takes a spec to block the tiny holes in pwk carbs. Have you taken the security screws out to remove the jet block and cleaned that.
I use fishing line and wd40 with the red straw to squirt through the tiny holes and if it spurts out the otherside it shows its clean. Do dame with pilot jets
|
|
|
Post by headcoats on Mar 9, 2024 12:03:21 GMT 1
More Dead Moon rawk!!!
|
|
|
Post by headcoats on Mar 8, 2024 10:57:46 GMT 1
And what's your secret to go flat out down Bray Hill with a full tank and cold tyres.. Should be drinking Bathams XXX !
|
|
|
So Sad
Mar 8, 2024 8:49:10 GMT 1
via mobile
Post by headcoats on Mar 8, 2024 8:49:10 GMT 1
|
|
|
Post by headcoats on Mar 7, 2024 21:26:07 GMT 1
|
|
|
Post by headcoats on Mar 7, 2024 20:50:33 GMT 1
Another DK cover
|
|
|
Post by headcoats on Mar 7, 2024 20:08:02 GMT 1
Great cover of a Dead Kennedys song π
|
|
|
So Sad
Mar 7, 2024 14:08:18 GMT 1
via mobile
JonW likes this
Post by headcoats on Mar 7, 2024 14:08:18 GMT 1
|
|
|
Post by headcoats on Mar 6, 2024 16:36:12 GMT 1
|
|
|
Post by headcoats on Mar 5, 2024 23:55:39 GMT 1
|
|
|
So Sad
Mar 5, 2024 15:30:02 GMT 1
via mobile
Post by headcoats on Mar 5, 2024 15:30:02 GMT 1
|
|
|
Post by headcoats on Mar 4, 2024 23:10:39 GMT 1
|
|
|
Post by headcoats on Mar 4, 2024 14:12:24 GMT 1
|
|
|
Post by headcoats on Mar 3, 2024 23:42:14 GMT 1
|
|
|
Post by headcoats on Mar 3, 2024 20:36:09 GMT 1
Yes that's not good at all No one able to get rebuilt I think (hope) the worldwide publicity the Crooked house has got,folks one way or another will get it built. Let's check this thread in 3 years time π Anyone fancy an LC meet in 2027 at the Crooked house π€£
|
|