|
Post by mak595 on May 17, 2020 10:47:38 GMT 1
Codner microns with some longer (quieter) cans bolted on
|
|
|
Post by tacky1 on May 17, 2020 17:51:13 GMT 1
Tyga pipes on the LC, You loose the center stand, bellypan hits the exhaust no matter what way you fit it, The expansion chambers are fat... Pipes crossover at the barrels.
Loud, very crackly, I love them
|
|
|
Post by tacky1 on May 17, 2020 17:54:27 GMT 1
|
|
|
Post by tacky1 on May 17, 2020 17:59:44 GMT 1
|
|
|
Post by tacky1 on May 17, 2020 18:03:35 GMT 1
Toomeys again, These are pretty rare, I beleive only 50 sets were made, Easy fit, no probs with plastics, The uppers are made with the same volume as the lowers and that puts the silencer flange right at the top plastics that leaves the can sticking out. I like it, Classic looking, a lot of peeps dont like the look, Same TZMike cans as the BT pipes, Not as loud though, Strange as both engines have the same STR3 port job, same 34mm carbs and filters etc,
|
|
|
Post by tacky1 on May 17, 2020 18:06:08 GMT 1
|
|
|
Post by dusty350 on May 17, 2020 18:06:19 GMT 1
|
|
|
Post by tacky1 on May 17, 2020 18:09:27 GMT 1
|
|
|
Post by tacky1 on May 17, 2020 18:11:16 GMT 1
|
|
|
Post by midlifecrisisrd on May 17, 2020 18:23:38 GMT 1
Mutts GP pipes (needs bike as bespoke) Quality and welding it awesome. Nice spread of power through complete rev range Steve
|
|
|
Post by midlifecrisisrd on May 17, 2020 18:25:30 GMT 1
TSA stainless exhausts Again quality is brilliant, very loud π Steve
|
|
|
Post by midlifecrisisrd on May 17, 2020 18:31:01 GMT 1
TSA made pipes but they are Mick Abbey race pipes in mild steel Cans are NK Racing alloy. Power comes in hard at 7k and peaks at 10500 so screamers Steve
|
|
|
Post by jessy03 on May 17, 2020 18:33:05 GMT 1
Mr Dents at Performance Fabrications
|
|
|
Post by midlifecrisisrd on May 17, 2020 18:35:18 GMT 1
Not got a complete pipe but these are black chrome Micron pipes with the Micralloy sealed cans No real crackle of them, a bit muted A very top end power pipe. Had another set back in the eighties and had the 5.5k stutter but revved to 11 Annoyed me so changed them to large can Allspeeds Fit is crap. They don't hit anywhere but hang too low and too much movement at the flanges. Black crud everywhere Steve
|
|
|
Post by midlifecrisisrd on May 17, 2020 18:40:06 GMT 1
Back in 1990, my 31k the first time I owned it, was a bit mix and match bodywork at this point in its life Original Allspeed large cans Great fit except for dribbling at the headers and ear splitting with the wadding out A good pipe but peak power was at 9k No laughing Steve
|
|
|
Post by tacky1 on May 17, 2020 19:39:42 GMT 1
TSA stainless exhausts Again quality is brilliant, very loud π Steve Love the line of these pipes Steve. Class build.
|
|
|
Post by midlifecrisisrd on May 17, 2020 19:43:43 GMT 1
TSA stainless exhausts Again quality is brilliant, very loud π Steve Love the line of these pipes Steve. Class build. Cheers Asked Kenny to follow the lower angle of the cone so they were more upswept Got a pair of short carbon cans with billet ends for it, really need to get it recommisioned if I can get through all the other bits I've got to do on other stuff Steve
|
|
|
Post by dusty350 on May 17, 2020 21:15:58 GMT 1
|
|
|
Post by jessy03 on May 17, 2020 22:04:58 GMT 1
Kenny @ TSA , made an unbelievable difference to the power
|
|
|
Post by donkeychomp on May 17, 2020 22:08:47 GMT 1
They all look great. It's all down to personal preferences though...plug and play or designed to match your engine? As for my mystery pipes they fit like a glove but no way can you use the centre stand...in fact I'd say the mounts really need cutting off! But seeing my frame is a UK one I am NOT going to do that!
Alex
|
|
|
Post by Yogi on May 17, 2020 22:18:43 GMT 1
Lomas pipes with Kevlar cans Matt π§Έ
|
|
|
Post by Yogi on May 17, 2020 22:20:23 GMT 1
Muttsnuts crossovers with Norboβs stubby cans Matt π§Έ
|
|
|
Post by Tobyjugs on May 17, 2020 22:21:32 GMT 1
Lomas pipes with Kevlar cans Matt π§Έ The Lomas pipes really look great on this bike.
|
|
|
Post by Yogi on May 17, 2020 22:23:45 GMT 1
Piece of crap with microns π₯΄π
|
|
|
Post by Yogi on May 17, 2020 22:26:54 GMT 1
Lomas gp pipes,shortened by me on my RS250 hybrid Matt π§Έ
|
|
|
Post by Yogi on May 17, 2020 22:31:27 GMT 1
Muttsnuts crossovers on my 385 which they were originally made for 115db measured by a Brands Hatch Marshall,noisy as hellπ
|
|
|
Post by Yogi on May 17, 2020 22:33:36 GMT 1
3xv hybrid with lomas pipes Matt π§Έ
|
|
|
Post by nelly on May 17, 2020 22:35:17 GMT 1
RG500 JL GP Style pipes with carbon cans and race tips. Easy to fit, hit the bellypan as the lower chambers are fat to make the GP look work, I had to space the belly apart to make it all work, Sound bloody calss, Very crackly and loud, Nice ding off them, My favorite of all of them. Beautiful looking bike if I had an rg I'd have it in Skoal Bandit colours,very rare to see it, you're a lucky fellaπππ»ππ»ππ»π
|
|
|
Post by dusty350 on May 18, 2020 7:12:12 GMT 1
|
|
rickymac
Drag-strip hero
Hi all new to this forum and owner of a barn find 250lc
Posts: 224
|
Post by rickymac on May 18, 2020 17:27:54 GMT 1
Tyga with alloy cans, fitted well, loud and crackle nice just did a plug check and tweaked the air screws.
|
|