|
|
Post by yamfan on Dec 4, 2014 19:46:55 GMT 1
Can I ask, what is the thin pin 2 up from the bottom in the middle for?  Here's my guess  OEB I did think of that OEB but dismissed it as a 350 obviously has 2. Think you're right though.  |
|
|
|
Post by rsvr1000 on Dec 4, 2014 22:22:13 GMT 1
yes you are correct here is the 2 together  |
|
|
|
Post by JonW on Dec 5, 2014 1:29:45 GMT 1
Ahh of course! I have one as mine was a 2fiddy. LOL, Cheers guys!
|
|
|
|
Post by rsvr1000 on Dec 7, 2014 17:32:12 GMT 1
|
|
paulr
L plate rider.
Posts: 47 
|
Post by paulr on Dec 7, 2014 19:51:01 GMT 1
Great job! Thanks for posting all the pics ;-)
|
|
|
|
Post by bare on Dec 13, 2014 5:36:05 GMT 1
Erm That's some shiny tires. You didn't Armourall them.. did you?
|
|
|
|
Post by butchers on Dec 13, 2014 20:38:36 GMT 1
total respect on this build. i love the attention to detail
|
|
|
|
Post by rsvr1000 on Dec 13, 2014 21:54:04 GMT 1
total respect on this build. i love the attention to detail Thanks Butch really appreciate your comments, been a tough week at work this week so had no chance to be in shed, few more bits have come through the post so fingers crossed more progress next week, still plenty to do  |
|
|
|
Post by lcyoungboy on Dec 14, 2014 0:53:41 GMT 1
Top quality build..going to be a cracker |
|
|
|
Post by bofski25 on Dec 17, 2014 21:05:07 GMT 1
take the tape off before the paint cures less chance of a balls up maybe 2 hours after painting trust me im a wheel painting expert   scrape the paint off ya mating surface i.e disc to wheel area  what paint have used on the wheels |
|
|
|
Post by rsvr1000 on Dec 18, 2014 21:20:51 GMT 1
total respect on this build. i love the attention to detail No mate, just plenty of soapy water  |
|
|
|
Post by rsvr1000 on Dec 18, 2014 22:36:58 GMT 1
|
|
|
|
Post by butchers on Dec 21, 2014 21:39:17 GMT 1
Wow Calipers thats my job required on mine. Master cylinder is powder coated just the calipers to do, Tony your standard is thru the roof it really motivates folk |
|
|
|
Post by rsvr1000 on Dec 26, 2014 21:23:32 GMT 1
|
|
|
|
Post by marsbar350 on Dec 26, 2014 21:32:47 GMT 1
why did snow stop play no roof on the man cave looking good anthony oh and paul |
|
|
|
Post by rsvr1000 on Dec 26, 2014 21:45:21 GMT 1
why did snow stop play no roof on the man cave looking good anthony oh and paul snow stopped play as i went flying on my arse again after Paul had gone lol |
|
|
|
Post by marsbar350 on Dec 26, 2014 21:51:33 GMT 1
hope it was caught on your security camera |
|
|
|
Post by rsvr1000 on Dec 26, 2014 21:57:44 GMT 1
hope it was caught on your security camera Just checked and no did not, would not mind thou last week when flying on the decking(black ice) so thought tonight would not risk it and would walk down the lawn and still went flying  |
|
|
|
Post by marsbar350 on Dec 26, 2014 22:15:46 GMT 1
bambi on ice wished id seen it |
|
|
|
Post by steve h on Dec 26, 2014 23:53:18 GMT 1
What is snow?
|
|
|
|
Post by rsvr1000 on Dec 28, 2014 20:46:38 GMT 1
|
|
|
|
Post by marsbar350 on Dec 28, 2014 21:38:09 GMT 1
whens the black rear sprocket going on
|
|
|
|
Post by rsvr1000 on Dec 28, 2014 21:59:13 GMT 1
whens the black rear sprocket going on after its run in  |
|
|
|
Post by fatfreddy on Jan 1, 2015 19:24:14 GMT 1
Lovely build! Got me inspired to kick mine off.
|
|
|
|
Post by rsvr1000 on Jan 4, 2015 20:34:47 GMT 1
|
|
|
|
Post by seang14 on Jan 6, 2015 14:45:47 GMT 1
Your Bikes comin on great Buddy! I'm putting a new Harness on my Frame at the moment and not sure which side of the Headstock it should run ? Should main part run through the metal Hoop, as left side if you were sitting on the Bike?? More photos of yours would be appreciated mate?? Or if anyone else has any I'd be Grateful Guys!?!?
Cheers Sean G
|
|
|
|
Post by rsvr1000 on Jan 6, 2015 19:35:05 GMT 1
I have put mine to the right side of the head stock, shall put some pics later, I went from the pics that some one posted of an original LC on this forum
|
|
|
|
Post by rsvr1000 on Jan 22, 2015 8:16:00 GMT 1
|
|
|
|
Post by Johnno636 on Jan 23, 2015 16:57:43 GMT 1
be happy if mine looks as good, great job well done.
|
|
|
|
Post by jarvis on Jan 23, 2015 19:42:43 GMT 1
Started my rebuild last year October
|
|
