|
Post by stusco on May 6, 2021 17:07:59 GMT 1
My jap import gamma blown bulbs were 23 watt I couldn’t get them so have fitted 21w but they are crap like a candle i was surprised they passed the mot
|
|
|
Post by stusco on May 5, 2021 15:39:55 GMT 1
😱that is a absolute pisser
|
|
|
Post by stusco on May 5, 2021 7:30:00 GMT 1
Thats shoehorned in there
|
|
|
Post by stusco on May 3, 2021 20:52:42 GMT 1
Yep bank holiday pissdown
|
|
|
Post by stusco on May 2, 2021 10:26:18 GMT 1
I had an orange mk1 chopper the front wheel fell off once when i was doing a wheelie I still remember it being really painful 😢
|
|
|
Post by stusco on May 1, 2021 20:58:51 GMT 1
I would remove the cover as said it probably too tight and refit and if needed use hot air gun on base to reshape
|
|
|
Post by stusco on May 1, 2021 16:48:22 GMT 1
Nah deox-c works a treat you’ll never have to wonder if your going to destroy your tank/ paintwork with home brew. ps you can keep the deox-c and use it again and again
|
|
|
Post by stusco on May 1, 2021 7:45:51 GMT 1
I’ll start Ice cream containers cut up with pegs to make your push bike sound like a motorcycle? My old man had a new 78 bonnie I wanted to replicate my dad! We had to go to the icecream van with a bowl for our icecream
|
|
|
Post by stusco on Apr 30, 2021 15:49:38 GMT 1
It’s normally ok after 24 hours on cases anyway i have painted wheels with it but can’t remember how long , I always pull the tape of before it’s fully dry
|
|
|
Post by stusco on Apr 30, 2021 14:09:13 GMT 1
Saw a guy at a bike meet with a turbo charged busa with extended swingarm and different back end with no plate i asked him about it he had it in his pocket as he used velcro
|
|
|
Post by stusco on Apr 30, 2021 7:31:10 GMT 1
Like I said you get heavy duty velcro there must be a small spot on the rear you can stick a show plate
|
|
|
Post by stusco on Apr 29, 2021 18:54:07 GMT 1
That s##t is now in your carbs
|
|
|
Post by stusco on Apr 29, 2021 15:03:16 GMT 1
What about velcro
|
|
|
Post by stusco on Apr 28, 2021 18:04:08 GMT 1
0.75mm squish probably did this
|
|
|
Post by stusco on Apr 28, 2021 15:09:37 GMT 1
I’d say these are on private land as the council won’t fix the potholes saying its not their land
|
|
|
Post by stusco on Apr 27, 2021 20:07:33 GMT 1
is it a roller door or traditional up and over?we make roller doors at our sister factory,all the materials are bought in from the Ukraine, they all come in white as standard,if you want it coloured its powdercoated,don't know how much we charge for it but I could find out for you? Are you anywhere near the North East of england? Thanks for the offer im in Edinburgh its up and over, im getting other quotes ,i was expecting a grand but not the £250 to change the colour
|
|
|
Post by stusco on Apr 27, 2021 19:13:34 GMT 1
If your telephone lines are underground maybe the ducts are full/collapsed. They burn very well... just saying....great for fire lighters. Fibre optics are underground here, phone lines up in the air. It sounds like your providers have no cash to do it properly?? Or you live in a rural area. Suburbs of Edinburgh ,we are surrounded by new builds on the greenbelt and we get poles and everyone else get fibre to the door it looks shit and that’s without cables they have even put them in peoples garden without notice say you can complain and get it moved wtf!
|
|
|
Post by stusco on Apr 27, 2021 17:07:20 GMT 1
Come home from work to find my street has been invaded by telephone poles i can see five from my spot on my settee 😡 apparently its for high speed broadband,all our services are underground so this is the cheapest method we weren’t consulted,the best bit is they still have to dig up the street to supply the poles
|
|
|
Post by stusco on Apr 27, 2021 15:08:15 GMT 1
The missus wants gray its also an extra £40 if i want extra security
|
|
|
Post by stusco on Apr 27, 2021 14:36:58 GMT 1
My garage door gave up at the weekend so got a quote today for a new one ,why is it £250 more expensive for any colour other than white!!!
|
|
|
Post by stusco on Apr 25, 2021 20:15:20 GMT 1
The only images of an A7r I can find all show oil pumps? But could be the same bike? Lovely looker though. Just thought it unusual for a competition bike to be ‘injected’. A mate had an A7, they weren’t slow as a road bike. The race kit gave it a 145mph top speed, think I read somewhere recently. Mates A7 ran sweet when he got it but was slow, someone had put the disc valves on the wrong splines. When he tried it out he came back chuffed, I said ‘but wasn’t the clutch slipping constantly?’ he said it was spinning. The bike was well quick now. Horrendously thirsty though, we went to a pub with his tank full, was less than 30 miles and it ran out halfway back! Put it behind a hedge and picked it up in the morning. Think they make a convincing looking racer, must have had some decent results. Sounds like the fuel consumption of my gamma
|
|
|
Post by stusco on Apr 25, 2021 18:47:12 GMT 1
Its already had a 460
|
|
|
Post by stusco on Apr 24, 2021 22:04:08 GMT 1
Not fair im allergic to cats and rabbits
|
|
|
Post by stusco on Apr 24, 2021 19:57:26 GMT 1
Yeah its pants compared to the lc
|
|
|
Post by stusco on Apr 24, 2021 19:16:08 GMT 1
Whipped the top end off the gamma and sent them to Mark Dent for a tune
|
|
|
Post by stusco on Apr 23, 2021 19:30:11 GMT 1
My mate had a pyrenean ,beautiful dogs but massive about the size of a polar bear ,he used groom it when he out walking until a neighbour went about saying someone had killed a sheep in the field at the back of his house
|
|
|
Post by stusco on Apr 23, 2021 17:30:29 GMT 1
Ive got a fire pit thats as close as ill get ☹️
|
|
|
Post by stusco on Apr 23, 2021 14:21:47 GMT 1
Joint piece bolt heads should face up As for the carbs they need the emulsion tube removed and cleaned as well as the little brass ball at the inlet side drilled, removed , air jet cleaned and new ball fitted Behind the ball is a passageway with a little brass jet in it leading to the emulsion tube area To get the emulsion tube out you remove the main jet and washer, refit the jet then tap it inward The emulsion tube will move into the slide area Steve Im not helping but have a funny story I caught my mate last week using a hammer and pin punch to remove the emulsion tube on his rm125 he was having a senior moment and hitting it in the wrong direction
|
|
|
Post by stusco on Apr 20, 2021 16:34:56 GMT 1
It might just be melted aluminium on the barrel that can be removed,more pics i think your pics worked for me
|
|
|
Post by stusco on Apr 19, 2021 18:05:38 GMT 1
We can see a melted oil line but like yogi says how?
|
|