|
Post by dan4771 on Feb 23, 2018 20:41:01 GMT 1
Evening all , anybody manufacturing these yet?
|
|
|
Post by donkeychomp on Feb 23, 2018 22:05:13 GMT 1
I had a chat with Dusty yesterday about this. Sadly, no. But maybe you could get an engineering firm to knock up a batch? Then sell them!
Alex
|
|
|
Post by dusty350 on Feb 23, 2018 22:22:29 GMT 1
I think it was Mutts that said the pattern that the new ones were made from has been lost. Hence no new pattern brackets available now. And that's fuelled the mental prices on ebay Dusty
|
|
|
Post by JonW on Feb 23, 2018 22:37:15 GMT 1
Im sure someone has one knocking about they could recopy. Norbo?
|
|
|
Post by midlifecrisisrd on Feb 23, 2018 23:16:12 GMT 1
Im sure someone has one knocking about they could recopy. Norbo? I think it's more the investment in the tooling that's the problem Can't be that big a market for them to justify it Steve
|
|
|
Post by JonW on Feb 24, 2018 0:54:45 GMT 1
|
|
|
Post by dusty350 on Feb 24, 2018 8:49:39 GMT 1
I think Norbo used to do the pattern bracket for about £15.00
Dusty
|
|
|
Post by dan4771 on Feb 25, 2018 2:21:08 GMT 1
Doable at £15 if there is enough interest. Would need to do a batch of at least 50 off though, as need to consider material / laser cutting costs as well as tooling. Yes please.
|
|
|
Post by JonW on Feb 25, 2018 8:40:52 GMT 1
Id have one at 15quid.
|
|
|
Post by Norbo on Feb 25, 2018 10:40:16 GMT 1
I think Norbo used to do the pattern bracket for about £15.00 Dusty Yes i did but the place that sold them to the wholesaler lost the moulds . i looked in to getting some lazer cut but they would not look like gen yam ones . i did fined a few a couple of weeks back so i had them plated and i have been putting them on e-bay just to see if they would sell.
|
|
|
Post by dan4771 on Feb 25, 2018 22:15:19 GMT 1
Please let me know if anyone makes any
|
|
|
Post by JonW on Feb 25, 2018 23:05:23 GMT 1
Just in case youve underestimated the work, have a good look at an OEM one as its a bit more than just a flat folded sheet, some bits are welded on etc.
|
|
|
Post by donkeychomp on Feb 26, 2018 0:41:58 GMT 1
I agree and I want one!
Alex
|
|
|
Post by dan4771 on Feb 26, 2018 8:34:11 GMT 1
That's more then fair. Sign me up for one please
|
|
|
Post by shaunthe2nd on Feb 26, 2018 8:39:24 GMT 1
Put me down for 2 painted black please. Thanks.
|
|
|
Post by shaunthe2nd on Feb 26, 2018 8:50:14 GMT 1
Have you thought about making the indicator tube mount from that is welded to the rear sub-frame of 250/350LC, and usually cut off?
Someone does them on ebay from time to time for about 32 quid plus delivery which is a bit steep. If you could do them for something like 15 quid too I reckon you would get a few takers.
|
|
|
Post by 4l04ever on Feb 26, 2018 9:36:19 GMT 1
How much would the basic horn brackets be each?
|
|
|
Post by shaunthe2nd on Feb 26, 2018 10:12:32 GMT 1
As I understand it from the previous messages standard brackets bare metal, primed or painted are 15 quid, and extra for zinc, chrome or stainless. Hope so as its a good price I think.
|
|
|
Post by Norbo on Feb 26, 2018 10:18:07 GMT 1
i looked in to getting some lazer cut but they would not look like gen yam ones I'd get the blanks laser cut before folding them, as I really don't fancy cutting 50 of them by hand (or even 5 lol) Cheaper than getting them stamped out like standard ones, as that would need yet more tooling. I did look in to making some . the place still have the sample bracket but its taking ages they say its hard to deaw them and be %100 all bolt holls and things with match up .
|
|
|
Post by Norbo on Feb 26, 2018 11:39:24 GMT 1
I know they take ages as well but when they make 1000's on jobs and my jobs are a few hundred they dont put the time in to the drawings as fast as id like them to . And they have had the bugger almost 2 months
|
|
|
Post by dono on Feb 26, 2018 12:56:16 GMT 1
Please keep this going, would have a chrome one 100%
|
|
|
Post by maccapacca on Feb 26, 2018 13:48:21 GMT 1
Put me down for a black one please and thank you
|
|
|
Post by shaunthe2nd on Feb 26, 2018 18:31:55 GMT 1
I will try sketch something up later this week.
|
|
|
Post by dusty350 on Feb 26, 2018 19:27:48 GMT 1
I would definitely have a black painted bracket. Dusty
|
|
|
Post by spacejunkie on Feb 26, 2018 20:42:45 GMT 1
I would also be interested in a couple as well.
In black please.
|
|
|
Post by gci_scot on Feb 26, 2018 21:39:33 GMT 1
I would like a stainless one. Thanks
|
|
|
Post by barney on Feb 26, 2018 21:41:29 GMT 1
I’d have a black painted one also please
|
|
|
Post by dan4771 on Feb 26, 2018 21:55:23 GMT 1
Black painted one please. Glad I started this post
|
|
|
Post by sbscnor on Feb 26, 2018 22:09:13 GMT 1
2 x black painted for me pls.
|
|
|
Post by donkeychomp on Feb 26, 2018 22:47:26 GMT 1
Forgot to say can I have mine in black please!
Alex
|
|