|
Post by stusco on Feb 8, 2024 8:34:35 GMT 1
Supercharged z1300?
|
|
|
Post by stusco on Feb 7, 2024 17:27:26 GMT 1
Im making up a sub loom to extend the wires from my zeel so i can fit it in the tail nice and neat ,what size of cable do you suggest? Im not up on wire dimensions and need to order some from kojaycat
|
|
|
Post by stusco on Feb 7, 2024 16:15:42 GMT 1
Is it not like a split tube in the bore or am remembering wrong? Maybe it been pushed in or missing you would need both pipes off to see I would wait on someone with better knowledge rdlccrazy.proboards.com/post/431407/thread
|
|
|
Post by stusco on Feb 7, 2024 15:59:26 GMT 1
|
|
|
Post by stusco on Feb 7, 2024 15:56:36 GMT 1
Standard exhaust? There are 2 types are both flanges the same thickness? There might be different gaskets im not sure Ive not seen it since the nineties but im sure someone will tell me my bikes have expansions
|
|
|
Post by stusco on Feb 5, 2024 8:27:45 GMT 1
Gale force winds
|
|
|
Post by stusco on Feb 4, 2024 21:29:15 GMT 1
I guess you would need to investigate this by inspecting the gears i have used the rd 125 gears I might have even used tzr i cant say 100% as i bought a few cheap of ebay at the time to get the right set im sure steve could tell you the number of teeth required
|
|
|
Post by stusco on Feb 4, 2024 19:04:32 GMT 1
|
|
|
Post by stusco on Feb 3, 2024 19:20:01 GMT 1
Watched the Wayne Gardner story on prime again today those 500 gp bike were deadly
|
|
|
Post by stusco on Feb 3, 2024 8:21:09 GMT 1
Looks like a buffalo but that would be asleep at night must be some kind of predator
|
|
|
Post by stusco on Feb 2, 2024 8:31:56 GMT 1
Cheers you could be right ill check tonight,but it still short by 50mm at the back and ive had to change other connections male to female
|
|
|
Post by stusco on Feb 1, 2024 21:46:17 GMT 1
Maybe after I’ve spoken/resolved the issue with them i just want the correct plugs i can fit them myself
|
|
|
Post by stusco on Feb 1, 2024 21:37:18 GMT 1
Apparently someone has changed the connectors on all the images of lc cdi’s on the web
|
|
|
Post by stusco on Feb 1, 2024 20:52:30 GMT 1
Im in contact with them they are phoning me tomorrow,but so far they don’t believe me even with photo evidence
|
|
|
YPVS
Feb 1, 2024 8:28:12 GMT 1
Post by stusco on Feb 1, 2024 8:28:12 GMT 1
Has that bike been on here?triumph callipers with the name ground off?
|
|
|
Post by stusco on Feb 1, 2024 8:25:38 GMT 1
I'm sure on the standard loom that male-female connections are always the same colour. There's a black to black 3 pin for the cdi and a white to white 3 pin for the alternator, and its this one that usually burns out. Hopefully someone will confirm as I'm going off memory. All the connections on the new loom are white
|
|
|
Post by stusco on Feb 1, 2024 8:24:53 GMT 1
Looks like yours were correct
|
|
|
Post by stusco on Jan 31, 2024 22:18:03 GMT 1
This one of the wrong connections Im not using the cdi its for info only both connections are male
|
|
|
Post by stusco on Jan 31, 2024 21:10:58 GMT 1
Email them with the size you want and they will send you them (you might have to pay) but if they supplied the wrong set ? I had to do this but I don’t remember what bike it was for
|
|
|
Post by stusco on Jan 31, 2024 20:40:35 GMT 1
I contacted them today and was told they are an exact copy of the 4l0 loom and all the connections are correct,so i have sent pictures and waiting a reply
|
|
|
Post by stusco on Jan 30, 2024 16:34:30 GMT 1
Anyone fitted one im finding a few of the connections are wrong ie the cdi connection is male where it should be female the generator one was the same and they are not cheap,these are round pins. The coil connection was the wrong as well this isn’t round pin also the rear brake light now that I think of it
|
|
|
Post by stusco on Jan 29, 2024 17:18:19 GMT 1
Dvla says its not had its first mot but also its on a sorn but ithink sorn is automatic if it was off the road before sorn started
|
|
|
Post by stusco on Jan 28, 2024 21:41:31 GMT 1
Maybe thats where im going wrong I thought it was chocolate
|
|
|
Post by stusco on Jan 28, 2024 19:56:11 GMT 1
Looks a bit caramac rather than chocolate for me but im no expert
|
|
|
Post by stusco on Jan 25, 2024 19:24:24 GMT 1
|
|
|
Lc loom
Jan 25, 2024 18:12:14 GMT 1
Post by stusco on Jan 25, 2024 18:12:14 GMT 1
Anyone got any pictures of a lc loom fitted,im fitting a legend loom to mine and its not as straight forward as i thought
|
|
|
Post by stusco on Jan 25, 2024 17:08:51 GMT 1
|
|
|
Post by stusco on Jan 23, 2024 8:56:46 GMT 1
Not sure if its a repeat but they are restoring a gt750
|
|
|
Post by stusco on Jan 23, 2024 8:30:27 GMT 1
I always like gold wheels
|
|
|
Post by stusco on Jan 21, 2024 17:49:30 GMT 1
|
|