Gezzer
L plate rider.
Posts: 27
|
Post by Gezzer on Feb 27, 2011 7:54:24 GMT 1
|
|
|
Post by masterbill on Feb 27, 2011 8:40:15 GMT 1
Hello,
I have never heard of them, I know of some people who have tried other carb copies and they have had a hard time sorting them out.
If you can get the jets and needles etc, it could be interesting to try.
just done a search and they seem popular with the scooter boys
|
|
Gezzer
L plate rider.
Posts: 27
|
Post by Gezzer on Feb 27, 2011 8:52:29 GMT 1
www.polini.com/en/page_405.htmljust found this, Polini are a big italian tuning company with a good reputation for tuning scooters and small capacity bikes, All jets and needles available Hmmmm
|
|
|
Post by masterbill on Feb 27, 2011 13:46:23 GMT 1
Hello,
I put PWK's on my f2 and it worked out quite expensive, by the time I bought the carbs , different needles, jets etc - it all adds up .
could be the same for this though
|
|
|
Post by JonW on Feb 27, 2011 23:51:15 GMT 1
Seems a lot of these copies out there now with OKO and others in on the act. These could be branded copies, or even a whole new design. its hard to tell.
Defo agree PWK isnt a cheap route to nirvana, but its said to be the way forward for many people so is worth a look if you dont like your standard setup.
|
|