|
Post by andygraham on Oct 28, 2010 21:20:41 GMT 1
just got me new frame with side and centre stands fitted ![:o](//storage.proboards.com/forum/images/smiley/shocked.png) the feet on them need welding. the main stand both bottoms are nearly off. can anyone post a pic so that i can reweld in the right position ![:P](//storage.proboards.com/forum/images/smiley/tongue.png) doin them tommorow at work ![;)](//storage.proboards.com/forum/images/smiley/wink.png) andy
|
|
|
Post by andygraham on Oct 28, 2010 21:45:28 GMT 1
the feet have curled up so with the stand upright then weld them wont be far off if i fitted for position they would snap off just need a pic all stripped now butch hope it all goes back in the same place!
|
|
|
Post by andygraham on Oct 28, 2010 22:12:31 GMT 1
thanks mate the plates on the bottom are flat to the floor then just curl up thru wear lets see if the 400amp murex welder can do the job on jap 1mm plate! got to cut the side stand off aswell and reweld some jockey has made a spaghetti heap welding it
|
|