RGV Yoke Pics Needed

[Trubrit]

Anyone Got Any Detailed pics of rgv yokes modded to go on a LC .....Cheers ........

[soccersmyth]

Have not seen any.
But as far as i'm aware they are a straight fit after putting a spacer under the bottom yoke bearing available from norbo's shop.

[onewheelsenough]

here you go



















for the bottom yoke. you have to put a 5mm spacer under the bottom yoke bearing. cut the lock stops off and reweld them on further forward. i cut an old yoke up and welded the brake splitter mount on to the bottom yoke. also made a couple of brackets to mount the horn bracket straight on to the yoke. it sounds hard but if you have a welder its not to bad. i have seen people just drill the bottom yoke and put an 8mm allen bolt through.

for the top yoke you need to file the holes out in the ignition and either cut the ignition loop off or file it out a bit. you will need to modify you your steering lock mount on your headstock because it no longer lines up i dont think i will bother because the bike will never be left outside. i had the risers welded on the yoke but you can just drill a coupke of hole and bolt the risers straight on.

[Trubrit]

Cheers Mate Just What I Needed......... ;D