|
Post by billy on Sept 3, 2010 18:44:41 GMT 1
I want the thing to run as cool as possible, so no huge compression I guess. But I've read somewhere that a tighter squish gap CAN sometimes make it run cooler. So I guess I'm asking, what squish clearance would be best to use? Bike's gonna be used more like a fast moped to wizz around on, rather then a W.F.O.T track bike. Bike is standard except running premix and a k&n style filter. (jetting will be dealt with asap ufcourse) I might aswell ask, what spark plug would be a good choice?
|
|
|
Post by tsa on Sept 4, 2010 16:36:06 GMT 1
0.9mm squish clearance and run a BR9ES or a BR10ES
|
|
|
Post by billy on Sept 4, 2010 17:26:58 GMT 1
0.9mm squish clearance and run a BR9ES or a BR10ES Thank's mate! Will be looking for a plug then as the previous one was a BPR5ES. Edit: If I can't get hold of a BR9ES or BR10ES, can I use a B9ES then?
|
|
|
Post by twostroker on Sept 11, 2010 0:17:01 GMT 1
Thank's mate! Will be looking for a plug then as the previous one was a BPR5ES. Edit: If I can't get hold of a BR9ES or BR10ES, can I use a B9ES then? b9es is fine...just remember to use a resister plug cap... what is the worst thing that can happen from using a non resister plug cap and non resistor plug? apart from making the occasional tv go fuzzy could it damage the bikes electrics?
|
|