Post by carlos on Jul 31, 2010 10:33:14 GMT 1
I'm hoping someone can confirm this for me so I don't have to buy a mk 3 loom
Mk3 CDI has one more wire than the mk2, this wire goes to the powervalve controller and tells it to do stuff
Brown wire and black wire provide power to the controller.
5 wires go from the controller to the servo.
Am I correct?
Mk3 CDI has one more wire than the mk2, this wire goes to the powervalve controller and tells it to do stuff
Brown wire and black wire provide power to the controller.
5 wires go from the controller to the servo.
Am I correct?
