|
Post by richardroberts on Jul 28, 2010 10:27:02 GMT 1
i was thinking of fitting tzr 3-spoke alloys on my lc125 mk2 and a rear disk conversion.
1. will the 17inch front fit the mk2 forks and will the caliper still fit? 2. how hard will it be to do the rear disk conversion and wot will need to be changed/adapted?
hope you can help thanks
|
|
|
Post by Norbo on Jul 28, 2010 11:04:22 GMT 1
The wheel will be to bif to fit the front as the MK2 wheel is 16" and the 3 spoke is 17" so it will hit the front mud guard and the caliper brackets on the forks wont match the new disk as that is not the same ether. But you can fit the compleat front end thats just a simple swop over
The back will fit in the standard swing arm no probs but you will have to make something to hold the caliper for the rear disk and a bracket to mount the mas cylinder to work the back caliper .
It has been done before and it looks grate so its worth the effort .
|
|
|
Post by richardroberts on Jul 28, 2010 17:49:56 GMT 1
ok i will give it ago thanks for the help
|
|
|
Post by richardroberts on Jul 28, 2010 19:22:02 GMT 1
what running gear would people reckomend wud like usd forks if possible? hope you can help.
|
|
grunt
Thrash Merchant
Posts: 365
|
Post by grunt on Jul 28, 2010 19:29:24 GMT 1
|
|
|
Post by richardroberts on Jul 29, 2010 10:25:15 GMT 1
will do m8 thanks
|
|