|
Post by broony on May 27, 2024 21:46:38 GMT 1
I have wanted to do this for years but always had something else to do but now is the time . Gathered the main parts a looong time ago ! LC frame ,RGV front and back end and wheels and a 350 YPVS engine . First question ( sorry , there will be many) should I use a ypvs wire loom or the standard LC loom and add in the ypvs controller ? I have a LC donor bike . any help will be very much appreciated guys 👍
|
|
|
Post by midlifecrisisrd on May 27, 2024 21:56:21 GMT 1
Hi
Personally I would use an lc loom
Use an ignitech or zeeltronic ignition unit and these will control the ypvs too
Steve
|
|
|
Post by JonW on May 28, 2024 0:02:24 GMT 1
Me too, LC loom with added parts. Its fits the bike and other parts.
|
|
|
Post by dusty350 on May 28, 2024 6:46:45 GMT 1
Welcome The Lc switchgear looks better on an Lc hybrid than the chunkier Pv items, imo. And a Zeel will solve the siting issues we all encounter when putting a Pv engine into an Lc (plus give you a more modern set up ![;)](//storage.proboards.com/forum/images/smiley/wink.png) ) ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|