|
|
Post by simonlc on Nov 27, 2023 16:17:03 GMT 1
Anybody know a decent Vapour Blasters in the Wolverhampton region? Need top and bottom cases and clutch cover blasting and been quoted £200 🤦♂️.
|
|
|
|
Post by Shytalk on Nov 27, 2023 16:37:41 GMT 1
Anybody know a decent Vapour Blasters in the Wolverhampton region? Need top and bottom cases and clutch cover blasting and been quoted £200 🤦♂️. Drop Andy user name AVB on here a PM just up the M6 Cheadle Staffordshire. |
|
|
|
Post by midlifecrisisrd on Nov 27, 2023 16:43:47 GMT 1
Yeah, Andy will sort you
Even if you post each way you'll save a packet
Steve
|
|
|
|
Post by simonlc on Nov 27, 2023 19:14:37 GMT 1
Cheers Guys 👍
|
|
|
|
Post by 4l04ever on Nov 27, 2023 19:52:55 GMT 1
Who quoted £200???
|
|
|
|
Post by simonlc on Nov 27, 2023 21:51:34 GMT 1
Yep obviously don’t want the job
|
|
|
|
Post by Shytalk on Nov 28, 2023 18:12:23 GMT 1
Yep obviously don’t want the job Equally - its nice to know who so we can avoid them in future... |
|
|
|
Post by jon on Nov 29, 2023 14:35:47 GMT 1
I’m pretty sure I paid around £120 for a set of YPVS cases to be blasted, so a clutch cover as well isn’t wildly off the mark. I’m sure there are cheaper places out there, but the person I used was up the road from me so no post cost, just a bit of petrol.
Jon
|
|
|
|
Post by 4l04ever on Nov 29, 2023 20:52:32 GMT 1
My local place wanted £70 which I though was too steep....
|
|
|
|
Post by Gunny on Dec 1, 2023 19:27:44 GMT 1
I had done for my Dt200, engine cases,barrel,head,both yokes,fork bottoms,both wheels including all the spokes,rear master cylinder,rear pegs,dogbones,chain adjusters,fork tops,wheel spacers,swing arm,caliper brackets £240
|
|
|
|
Post by kirkhd on Dec 2, 2023 18:02:56 GMT 1
|
|
|
|
Post by jon on Dec 3, 2023 11:15:00 GMT 1
I had done for my Dt200, engine cases,barrel,head,both yokes,fork bottoms,both wheels including all the spokes,rear master cylinder,rear pegs,dogbones,chain adjusters,fork tops,wheel spacers,swing arm,caliper brackets £240 That certainly seems like good value. Perhaps the price is regional? I’m in Kent. The guy I used was a good mate of Bob Farnham and used to do blasting for him. Jon |
|
