higgsy
Thrash Merchant
Posts: 458
|
Post by higgsy on Mar 2, 2010 12:01:36 GMT 1
Couple of pics off my nearly completed YPVS/LC on the YPM stand at the Ally Pally Some of your bilts on here Norbo :-) Paintwork still needs to be finished as it was still wet on the morning of the show!   |
|
higgsy
Thrash Merchant
Posts: 458
|
Post by higgsy on Mar 4, 2010 0:44:55 GMT 1
Nice  We had an LC2 on the stand, not as nice as yours but it got loads of attention.  The paintwork is a pro job by my sponsor Magamorphosis, not finished yet as i gave Rob no time to do it and it was still wet on the morning of the show! We have a 59hp power limit in the Yamaha Past Masters for 350's, with the PWK 28's and Martin 77 pipes I should not have to touch the engine, if I do it'll be squish adjustment and a little more compression. I'm using an F2 ignition, seen too many 31K stators and CDi's fail, but I've static advanced it 3 degrees with an offset woodruff key. Have to see how it goes, we have to use standard Yamaha ignitions. Cheers Higgs |
|
|
|
Post by Norbo on Mar 4, 2010 16:18:50 GMT 1
looks nice but i dont see any LC Crazy stickers on it and that wont do at all . PM your address and i;ll pop a couple in the post for the side pannels . They are good 2 BHP you know like go faster stripes LOL .
|
|
higgsy
Thrash Merchant
Posts: 458
|
Post by higgsy on Mar 4, 2010 19:43:05 GMT 1
That's because they are on the van mate That needs all the hp help it can get! |
|
