|
|
Post by alankelly on Jul 16, 2023 19:13:40 GMT 1
Not sure if there is any interest but just made a small batch of my “float height gauge”   If anybody would like one total for one is only £2.20 that will include post Just pm me if interested Best wishes always Al |
|
|
|
Post by headcoats on Jul 16, 2023 19:58:15 GMT 1
Oooh can you make one for PWK 28 carbs 🤗
|
|
|
|
Post by stirling11 on Jul 16, 2023 20:04:39 GMT 1
Yes please thanks
For YPVS carbs, I'm presuming there is no difference
I'll PM you my details
|
|
|
|
Post by wallcraft on Jul 16, 2023 20:25:34 GMT 1
Pm sent
|
|
|
|
Post by rigga on Jul 16, 2023 20:45:58 GMT 1
Oooh can you make one for PWK 28 carbs 🤗 A very good question indeed. |
|
|
|
Post by alankelly on Jul 16, 2023 20:47:08 GMT 1
I could if somebody does a sketch of its required profile
Best wishes Al
|
|
|
|
Post by midlifecrisisrd on Jul 16, 2023 21:09:20 GMT 1
PWK one would be great too 👍
Steve
|
|
|
|
Post by shaunthe2nd on Jul 16, 2023 23:13:44 GMT 1
Alan, I will have one please if any left?
Thanks, Shaun
|
|
|
|
Post by jon on Jul 17, 2023 7:10:39 GMT 1
I’ll take one also Al if any left?
Jon
|
|
|
|
Post by darboots on Jul 17, 2023 12:22:08 GMT 1
I'd also like one, please Al.
|
|
jimmyg
Drag-strip hero
Posts: 241
|
Post by jimmyg on Jul 17, 2023 14:35:51 GMT 1
I would have Pwk one if they happen 👍
|
|
|
|
Post by Yogi on Jul 17, 2023 21:13:34 GMT 1
I’ll take a ypvs one please Al if any left 👍
Matt 🐻🐶
|
|
|
|
Post by alankelly on Jul 17, 2023 21:17:19 GMT 1
Hi all
Thank you for all the requests
I will ensure that everyone is sorted and be in touch as and when your request is ready
Best wishes Al
|
|
|
|
Post by lc350pete on Jul 18, 2023 8:33:53 GMT 1
Hi Alan me too for a YPVS one
|
|
|
|
Post by abar121 on Jul 18, 2023 8:40:21 GMT 1
Hi Al,
I'll take one too please.
Cheers.
|
|
|
|
Post by lcmarky on Jul 18, 2023 9:20:57 GMT 1
I could if somebody does a sketch of its required profile Best wishes Al Whereabouts are you Alan as I could bring over a carb to measure? |
|
|
|
Post by alankelly on Jul 18, 2023 9:29:31 GMT 1
I could if somebody does a sketch of its required profile Best wishes Al Whereabouts are you Alan as I could bring over a carb to measure? Hi I am in north swindon Best wishes Al |
|
|
|
Post by lcmarky on Jul 18, 2023 11:19:48 GMT 1
Whereabouts are you Alan as I could bring over a carb to measure? Hi I am in north swindon Best wishes Al ..not close enough for a quick trip then. If you send me a PM with what you need I'll have a measure. Cheers Mark |
|
naich
Thrash Merchant
Posts: 342
|
Post by naich on Jul 18, 2023 11:25:05 GMT 1
Hi. You seem to be doing these at cost - if that's the case are you happy to share the .stl file for it? Cheers.
|
|
|
|
Post by alankelly on Jul 18, 2023 13:10:39 GMT 1
Hi yes doing them at cost for the forum lads but as I have started selling them other places would rather not share the STL file
Sorry and hope you understand
Best wishes Al
|
|
naich
Thrash Merchant
Posts: 342
|
Post by naich on Jul 18, 2023 13:28:03 GMT 1
Hi yes doing them at cost for the forum lads but as I have started selling them other places would rather not share the STL file Sorry and hope you understand Best wishes Al Absolutely understand 100% Good luck with them! Cheers, N. |
|
|
|
Post by geoffb on Jul 18, 2023 13:56:53 GMT 1
I’ll take 1 too please Al 👍
|
|
|
|
Post by alankelly on Jul 19, 2023 11:04:36 GMT 1
Hi I am in north swindon Best wishes Al ..not close enough for a quick trip then. If you send me a PM with what you need I'll have a measure. Cheers Mark Hi Mark Ok pm sent Best wishes Al |
|
|
|
Post by 4ce on Jul 22, 2023 12:11:18 GMT 1
Hi Alan
Could I Have a gauge for the YPVS please?
I see you have lots of interest so will probably have to make some more.
That,s ok by me, not in any hurry
cheers Nigel
|
|
|
|
Post by yamnewbie on Jul 22, 2023 15:36:16 GMT 1
Not sure if there is any interest but just made a small batch of my “float height gauge” If anybody would like one total for one is only £2.20 that will include post Just pm me if interested Best wishes always Al PM Sent |
|
|
|
Post by alankelly on Jul 22, 2023 19:02:08 GMT 1
Ok all Been a bit of a crazy week with these float gauges😳  Many thanks for all the requests and will start to sort out all this week all being well so keep an eye on your inbox for message’s Best wishes Al |
|
|
|
Post by urbantangleweed on Jul 23, 2023 7:55:13 GMT 1
Great idea Alan, I'll have 2 if you've any left.
|
|
matss
L plate rider.
RD250lc 1981
Posts: 28
|
Post by matss on Jul 23, 2023 8:48:56 GMT 1
Thanks Al. Top man 👍
|
|
|
|
Post by hopper350 on Jul 23, 2023 18:23:23 GMT 1
Hi, do you have any left. regards Paul
|
|
|
|
Post by urbantangleweed on Mar 7, 2024 11:16:10 GMT 1
Hi Alan,
I've been building a pair of carbs up this morning and it was the first opportunity to try out the float height gauge I had from you. It actually works really well but I wonder if the propensity to rock when placed on the gasket face helps or hinders.
What do you think (if it's possible) to print them with say 15mm or so long "feet" on each side so that when it's placed on the gasket face it sits flat?
|
|
