|
Post by muttsnuts on Jul 8, 2023 21:39:48 GMT 1
Decided to sell my last set of relined 350LC barrels (never been fitted etc since being done), all stock porting, not messed with, they come with new Mitaka pistons of course, problem I have is value, so come on, I am thinking around £900, but is that too much, too little or about right.
Clearly I could throw them on ebay and see what they fetch, but I'd sooner offer them on here first, but can't decide what is a fair price for them......
|
|
|
Post by reedpete on Jul 8, 2023 22:09:57 GMT 1
Well, a set of barrels that need relining but otherwise are in nice condition are going to cost circa £250, and don’t think there’s much change these days out of £650 if you asked PJME to do the job and supply pistons … so in my mind the answer can be derived that way…
|
|
|
Post by midlifecrisisrd on Jul 8, 2023 22:37:01 GMT 1
As above, scrap barrels are 200+ then the refine cost and the wait
You are in the ball park
Steve
|
|
|
Post by donkeychomp on Jul 8, 2023 22:37:43 GMT 1
All I can say is that the 250 ones you sold me were a bargain Dave. The 350 ones are priced bang on.
Alex
|
|
|
Post by veg on Jul 8, 2023 22:46:26 GMT 1
As above, would you get more on eBay yep you know that so I think that’s a decent and very fair price.
|
|
|
Post by chrisg on Jul 9, 2023 14:37:20 GMT 1
I think the price is fair and about right, however getting someone to buy maybe more tricky in the financial climate. GLWTS
|
|
|
Post by muttsnuts on Jul 9, 2023 14:45:35 GMT 1
thanks guys, good to know I amnot completely out of touch
Chrisg, yeah you might be right, if they don't sell, they can stay on the shelf, just sorting through stuff and thinning out parts I'll probably never use, got alot of parts to wade through, but too busy fixing bikes, don't even have time to ride my own bikes !
|
|
|
Post by markrd250lc on Jul 9, 2023 18:04:11 GMT 1
They look like a good price TBH, makes me realise mine are deffo over priced and if i was going down the 350 route i would have yours without hesitation.
GLWS
Mark
|
|
|
Post by KevtheRev on Jul 10, 2023 15:53:06 GMT 1
Chris Applbey did mine about 20yr ago for about 250 bucks using my own cylinders . That was a long time ago .Fair price I reckon for a set of ready to go cylinders .
|
|
|
Post by midlifecrisisrd on Jul 10, 2023 16:03:15 GMT 1
There is a set on ebay without pistons for a grand 😳
Steve
|
|
|
Post by Tobyjugs on Jul 10, 2023 16:56:19 GMT 1
I couldn't give you an answer on this because I always think everything RD is too expensive. I would only say that you are a business so put up enough markup above what it cost you like a normal company.
|
|
|
Post by muttsnuts on Jul 23, 2023 11:53:57 GMT 1
I wasn't far off, they sold for £860 on fleabay
|
|
|
Post by chrisg on Jul 23, 2023 14:40:37 GMT 1
I wasn't far off, they sold for £860 on fleabay Someone got a bargain.
|
|