|
|
Post by tawlksie on Jul 7, 2023 10:26:22 GMT 1
I have just bought a ypvs350 f2 and the carbs are a little bit out. I have checked the jetting and balanced my carbs also set the float heights. I am running allspeed m1 pipes and I was wondering what air screw settings people where using?
|
|
|
|
Post by arrow on Jul 7, 2023 10:32:49 GMT 1
Welcome in.
I don't know the particular settings on that bike, but don't be afraid to adjust the screws by different/dissimilar amounts according to what the engine actually needs.
|
|
|
|
Post by beardy on Jul 8, 2023 20:56:53 GMT 1
As said above. Don’t worry about different settings for each carb. Standard is generally about 1.5 turns out. Mine are not the same for each carb. Although to be fair it was set up on a dyno so I’d never have worked it out by myself.
|
|
