|
|
Post by slyfox762 on Mar 6, 2023 19:00:24 GMT 1
Hi all, Has anybody been successful with DIY Nickel electro-plating?....and would recommend a beginners kit? Thanks  |
|
|
|
Post by totty79 on Mar 6, 2023 19:30:32 GMT 1
Never tried nickel but I have successfully zinc plated with a kit from Gateros Plating.
|
|
|
|
Post by midlifecrisisrd on Mar 6, 2023 19:47:39 GMT 1
I have both a zinc and a nickel kit from Gateros plating
Not used them for years as slow and be a bit hit and miss
The nickel kit was good for smaller parts
The zinc kit I stopped using as I found a good local plater
I just looked and they don't do the Olive drab passivated anymore which doesn't surprise me due to the toxicity/hazards it carries
Steve
|
|
