|
|
Post by spondon440 on Jun 20, 2022 21:26:04 GMT 1
Does anyone know the dimensions of the rear wheel spacer on the sprocket side of an rgv250 vj22?
Andy
|
|
|
|
Post by dusty350 on Jun 21, 2022 7:02:23 GMT 1
|
|
|
|
Post by midlifecrisisrd on Jun 21, 2022 9:02:53 GMT 1
Had it in my head it was 20mm wide but wasn't confident enough in my memory to post
Steve
|
|
|
|
Post by spondon440 on Jun 21, 2022 21:45:05 GMT 1
Sweet, thanks Dusty, is it counterbored for a reason?
|
|
|
|
Post by dusty350 on Jun 21, 2022 21:55:59 GMT 1
Nothing obvious - it sits against the sprocket hub bearing and the chain adjuster, so maybe a weight saving measure, as it's steel ? Dusty  |
|
|
|
Post by midlifecrisisrd on Jun 21, 2022 22:06:36 GMT 1
Is it not something to do with the sprocket carrier bearing being a bigger size as the spacer that goes between the carrier and the wheel is captive in the bearing
Steve
|
|
|
|
Post by spondon440 on Jun 24, 2022 20:34:35 GMT 1
|
|
I've got Mouse's rear Vj22 spindle and spacers on my bench at the mo, so here ya go 
