|
|
Post by mak595 on Mar 28, 2022 16:47:20 GMT 1
|
|
|
|
Post by shaunthe2nd on Mar 28, 2022 18:15:16 GMT 1
That's for the funny speed sensor diode thing that is linked to the indicator cancel circuitry, and goes in the slot at rear of the speedo housing.
|
|
|
|
Post by midlifecrisisrd on Mar 28, 2022 18:16:17 GMT 1
As above
Reed switch for the Indy self cancel
Steve
|
|
|
|
Post by shaunthe2nd on Mar 28, 2022 18:16:45 GMT 1
Not the best picture but may help...  |
|
|
|
Post by mak595 on Mar 28, 2022 22:06:14 GMT 1
That's for the funny speed sensor diode thing that is linked to the indicator cancel circuitry, and goes in the slot at rear of the speedo housing. Was that on the speedo that you did for me? |
|
|
|
Post by shaunthe2nd on Mar 28, 2022 22:27:48 GMT 1
That's for the funny speed sensor diode thing that is linked to the indicator cancel circuitry, and goes in the slot at rear of the speedo housing. Was that on the speedo that you did for me? No, you didn't send me that part. It's usually part of the clock sub-loom and just clips into the rectangular slot at the rear of the speedo. You can see it in the first 2 pics in this ebay advert, its the lower or the 3 sub looms in those pics. www.ebay.co.uk/itm/275237089210?hash=item401568afba:g:P8oAAOSwpv1iQNZB |
|
|
|
Post by mak595 on Mar 28, 2022 22:42:21 GMT 1
Was that on the speedo that you did for me? No, you didn't send me that part. It's usually part of the clock sub-loom and just clips into the rectangular slot at the rear of the speedo. You can see it in the first 2 pics in this ebay advert, its the lower or the 3 sub looms in those pics. www.ebay.co.uk/itm/275237089210?hash=item401568afba:g:P8oAAOSwpv1iQNZBAh ok thanks, I couldn't see the other pic cos I'm at work atm, i haven't got that bit anyway !! Guessing i could live without it? |
|
|
|
Post by shaunthe2nd on Mar 28, 2022 22:56:19 GMT 1
The self cancel bit seldom works so wouldn't worry about that myself, but you will want to connect up the speedo internal light which is powered from the same sub-loom, or wire it into the equivalent tacho internal light on the other sub-loom, as they normally come on together.
If you don't fit the reed switch into the speedo housing, tape over the slot to avoid dirt ingress into the clock.
|
|
|
|
Post by mak595 on Mar 28, 2022 23:09:59 GMT 1
The self cancel bit seldom works so wouldn't worry about that myself, but you will want to connect up the speedo internal light which is powered from the same sub-loom, or wire it into the equivalent tacho internal light on the other sub-loom, as they normally come on together. If you don't fit the reed switch into the speedo housing, tape over the slot to avoid dirt ingress into the clock. Spot on, thanks shaun |
|
