|
|
Post by petenofear on Mar 11, 2022 13:36:21 GMT 1
Hello all been a wile since I have been on but have a mk1 Rd125lc I am started to restore,
after a few bits of any one can help please ,,
1. Centre stand ,,,,,, no longer needed
2. Rear outer mudguard with number plate holder Hopefully now no longer needed,
3. rear foot beg brackets , both sides ,,,,,, no longer needed
4.front nose cone ,
4 belly pan ,,,,, found a genuine one no longer needed
5 front forks must be mint , Mine rusty
6. Rear grab rail again must be mint ,, mine rusty
7 chain guard
7 standard exhaust
8 clocks
there will probably be more , most of the little parts I can get new still from norbo,
thanks soon as I start I will stick a restro thread up ,
|
|
|
|
Post by Gunny on Mar 11, 2022 14:41:02 GMT 1
There was a guy Nick Dore I think on the Rd125LC Facebook group, had some new stands made a couple of weeks ago, they were very good copies, might be worth a try
|
|
|
|
Post by petenofear on Mar 11, 2022 18:15:14 GMT 1
I am not on Facebook book mate ,
To old for all that ball poo lol
If you can find any details for me contact numbers ect that would be grate thank you
Pete
|
|
|
|
Post by petenofear on Mar 13, 2022 14:05:35 GMT 1
Have found some rear foot peg hangers now ,
Still in need of the rest ,,
Plus if any one has a standard exhaust I would like one as well ,
Regards
|
|
|
|
Post by dave31za on Mar 14, 2022 16:58:14 GMT 1
|
|
|
|
Post by petenofear on Mar 14, 2022 19:09:36 GMT 1
No mate there not completely different 👍but thanks for thinking of me
|
|
|
|
Post by petenofear on Mar 17, 2022 21:33:30 GMT 1
Still on the look out of any one can help thanks
|
|
|
|
Post by yamman1066 on Mar 18, 2022 10:47:37 GMT 1
i might have grab rail
|
|
|
|
Post by petenofear on Mar 18, 2022 19:38:05 GMT 1
Excellent let me know thank you |
|
|
|
Post by petenofear on Mar 18, 2022 19:40:49 GMT 1
Little pic of the bike ,, owe and my xr2
|
|
|
|
Post by petenofear on Mar 18, 2022 19:43:55 GMT 1
|
|
|
|
Post by brigitte on Mar 19, 2022 12:54:18 GMT 1
You can order new stanchions in Italy: No pitting, not bent but I had little problems to fit the button above the spring. The chase for the circlip was not deep enough.
Brigitte
|
|
|
|
Post by petenofear on Mar 19, 2022 18:33:16 GMT 1
Thanks mate ,
I am going to look in to getting then re chromed as would rather keep the original ones if I can ,,standard
|
|
|
|
Post by petenofear on Apr 4, 2022 16:43:17 GMT 1
Hi I am still on the lookout for these parts, had v5 back now so looking at pulling bike apart to start The rebuild,
😉👍
|
|
|
|
Post by petenofear on Apr 14, 2022 17:00:47 GMT 1
Surely someone has some of these parts living around ,,
|
|
|
|
Post by simon998 on Apr 14, 2022 20:45:46 GMT 1
1. Centre stand - Rare - I think theres a guy on facebook remade them though?
2. Rear outer mudguard - The bit where the numberplate bolts to or the bit under the seat?
3. rear foot beg brackets , both sides - I'll have one side in the garage
4.front nose cone , - Can buy copies from the RDLC Crazy shop
4 belly pan - As above, can buy copies. they arent bad but usually dont have the bar across the top
5 front forks must be mint , Mine rusty - New stantions are £155 on eBay, I'll dig out the order.
6. Rear grab rail again must be mint ,, mine rusty - Rare, they all rust it seems. I personally paint mine black but dad stripped his and polished it.
7 chain guard - Might have one, I'll check on Sunday
7 standard exhaust - I've a 12A here and possibly a slightly damaged 10W. I'll speak to dad.
8 clocks - mk1 or 2? Should have a set of each possibly.
Dad and I build 125lc's in our spare time, i'll take a look when i'm at the shed on Sunday and see what I can dig out.
|
|
|
|
Post by petenofear on Apr 15, 2022 7:14:10 GMT 1
Thanks for your help Simon will look forward to hearing back from you ,,
Nose cone and belly pan only looking for original,
I am after the rear outer mudguard and number plate holder , mine all cut up as they did back then ,I now had some rear foot peg brackets 👍
Thank you pete
|
|
|
|
Post by LC_BOTT on Apr 15, 2022 7:48:13 GMT 1
|
|
|
|
Post by petenofear on Apr 15, 2022 12:23:37 GMT 1
Got that one in my watch list thanks
|
|
|
|
Post by petenofear on Apr 16, 2022 19:36:20 GMT 1
Just won that stand on eBay so no longer needed a stand ,, goodness I had to pay for that 😮
|
|
|
|
Post by simon998 on Apr 18, 2022 13:02:57 GMT 1
Did you pay the £160? Wild! My dad said after he seen it sell for that that'd he'd nearly sell the two he has on the shelf lol.
I'll be up again today, I'll ask what he has.
|
|
|
|
Post by petenofear on Apr 18, 2022 14:39:33 GMT 1
Yes I did mad money ,they just don’t come up for sale and normally I won’t have paid that much , but the beer was flowing and I got carried away ,, not doing that again
Thank you Simon
|
|
|
|
Post by brucie on Apr 19, 2022 10:45:03 GMT 1
Seen a belly pan on eBay new but 245 plus postage 😮😮
|
|
|
|
Post by petenofear on Apr 19, 2022 16:42:54 GMT 1
Seen a belly pan on eBay new but 245 plus postage 😮😮 Yes I have that in my Watch list it’s come down price a bit but I can’t pay that sort of money for that ,way over price for me one will come up , |
|
|
|
Post by badger1 on Apr 19, 2022 21:21:18 GMT 1
|
|
|
|
Post by petenofear on Apr 21, 2022 18:04:47 GMT 1
Believe I have a belly pan now , just waiting on delivery,,
|
|
|
|
Post by petenofear on Apr 25, 2022 13:00:02 GMT 1
Belly pan arrived today so that’s another one ticked of the list
|
|
|
|
Post by petenofear on Apr 27, 2022 14:45:21 GMT 1
Found a rear mudguard and number plate holder now so hopefully not needed just waiting on in arriving,
Now I believe I only need the following,
front nose cone ,
Front forks must be mint , Mine rusty
Rear grab rail again must be mint ,, mine rusty
chain guard
standard exhaust
Mk1 Speedo /clocks or just the Rev counter hand as mine broken
|
|
|
|
Post by petenofear on Aug 3, 2022 17:55:08 GMT 1
Still on the hunt if anyone can help ,,
Not had time to do anything with it as another project got in the way ,but still in need 👍
|
|
