|
Post by alankelly on Oct 13, 2020 19:33:30 GMT 1
Hi all Cheeky request please Has anybody fitted one of my kidney clock repair bits yet Just want to raise some funds for the CB400F so I can replace the ageing ignition system and wanted to advertise them on eBay so would anybody be willing to send me a photo of the finish repair please so I can add this photo to my listing As always any help much appreciated Look after yourselves and stay safe all Best wishes always Al
|
|
|
Post by shaunthe2nd on Oct 13, 2020 19:39:43 GMT 1
Alan, I'm hoping to buy one of these off you to fit to some kidney clocks I have just rebuilt, so if you can get one to me before weekend I will fit it and take a picture for you. You may get a pic in the meantime so could be your plan B!
Let me know cost and will ping you a Paypal gift for it.
Thanks and cheers, Shaun
|
|
|
Post by midlifecrisisrd on Oct 13, 2020 19:42:11 GMT 1
Apologies Alan, I was supposed to do this for you but have just been swamped trying to get through other stuff π
Steve
|
|
|
Post by alankelly on Oct 13, 2020 19:47:36 GMT 1
Alan, I'm hoping to buy one of these off you to fit to some kidney clocks I have just rebuilt, so if you can get one to me before weekend I will fit it and take a picture for you. You may get a pic in the meantime so could be your plan B! Let me know cost and will ping you a Paypal gift for it. Thanks and cheers, Shaun Hi Shaun Hopefully now I am about and I have now got some a new supply of ASA (not sure why but itβs been a bit of a sod to source for my usual source I will try to get the model finalised and them and see if I can successfully print print a prototype clock case for you and send both the ignition surround back and your tachometer and speedo cases back in one go so you can test fit this prototype case before I print a production white one (Thatβs let the cat out of the bagππππ) Hope to catch up very soon Best wishes Al
|
|
|
Post by alankelly on Oct 13, 2020 19:50:55 GMT 1
Apologies Alan, I was supposed to do this for you but have just been swamped trying to get through other stuff π Steve No worries Steve Hope all is well I have not been well recently so not been about on the forum too and the printing has taken a back seat but hopefully things are looking up and I am on the mendπ Hope all is ok with you too Catch up soon Best wishes Al
|
|
|
Post by midlifecrisisrd on Oct 13, 2020 20:47:50 GMT 1
Apologies Alan, I was supposed to do this for you but have just been swamped trying to get through other stuff π Steve No worries Steve Hope all is well I have not been well recently so not been about on the forum too and the printing has taken a back seat but hopefully things are looking up and I am on the mendπ Hope all is ok with you too Catch up soon Best wishes Al I'm fine and glad you are on the mend I just got snowed under with bikes and house stuff. Took the decision to build my current bike naked so not using kidney clocks on it so got pushed down the list That and I never had a cover that didn't need a lens replaced too and didn't want to fit a surround till I'd sorted that Steve
|
|
|
Post by lc350pete on Oct 24, 2020 9:04:28 GMT 1
Hi I would like to buy one of your ignition clock surrounds please for the LC2 kidney clocks mine is broken
|
|
|
Post by ringdingding on Oct 24, 2020 10:17:10 GMT 1
I'll get one sorted out this week, probably spray it as well. Before and after?
|
|