|
|
Post by headcoats on Jun 25, 2020 10:07:31 GMT 1
Well we had the Fuel taps by Tourmax being hiked up in price,and now on fleabay the made in Japan Tourmax brake discs have gone down in price!
£109 for a pair for my KR1S wheels
Never used them before but I'm trusting the "made in Japan" statement ! |
|
|
|
Post by muttsnuts on Jun 25, 2020 12:39:35 GMT 1
yes, the Tourmax discs are good, I had aset for the KR1S here, juast sewnt them back today as they don't fit the KR1 - despite beinfg assured they would, needless to say I've had a hell of a job finding the correct discs to fit a KR1 - interestingly, they cost a sh*t load more than the KR1S discs !  |
|
|
|
Post by headcoats on Jun 25, 2020 12:54:16 GMT 1
Yes KR1 totally different discs, calipers and fork bottoms , The chrome stanchions are the same and can be swopped
I paid more than that for one EBC disc last year
Need to look for a rear disc too , so don't know if Tourmax do one ?
|
|
|
|
Post by muttsnuts on Jun 25, 2020 16:49:21 GMT 1
what size is the rear as I had one, was too big for the KR1, but 3 stud fitting and no offest (flat disc), think it was either 230mm or 240mm diameter
|
|
|
|
Post by headcoats on Jun 25, 2020 17:46:53 GMT 1
I think it's 200mm and the KR1 and S models have the same rear disc
|
|
|
|
Post by LC_BOTT on Jun 25, 2020 21:24:49 GMT 1
I had one of the remade (on ebay) rear discs, all fitted fine, but did seem quite thick in comparison, to probably a worn standard disc.
|
|
|
|
Post by headcoats on Jun 25, 2020 21:43:15 GMT 1
I had one for my red LC and I couldn't get 2 new brake pads in because of how thick the disc was !
I had to put a part worn pad in on one side and wait until the other side worn down a bit !
|
|
|
|
Post by LC_BOTT on Jun 26, 2020 8:04:00 GMT 1
I had one for my red LC and I couldn't get 2 new brake pads in because of how thick the disc was ! I had to put a part worn pad in on one side and wait until the other side worn down a bit ! Similar to me too, I did manage to just get it fitted with new pads. |
|
