|
Post by andrewm on Apr 5, 2019 22:07:31 GMT 1
|
|
|
Post by andy748 on Apr 6, 2019 8:29:51 GMT 1
Lovely looking thing there Andrew, get those brake hoses round the back and P clipped out of the way of your forks as they'll take off the anodizing after rubbing (Even if plastic coated), should be a steel bracket under the front mudguard at the back for the hoses to locate into? Enjoy the fiddling! Andy.
|
|
|
Post by looey on Apr 6, 2019 13:27:37 GMT 1
Looks to me like the lines are probably too short to run in the correct route with the forks at full extension (which will only be achieved with the front wheel off the ground) . Smart looking bike though
|
|
|
Post by cb250g5 on Apr 6, 2019 14:38:12 GMT 1
Those bars look a long way away & down. Wouldn't suit me nowadays.
|
|
|
Post by 17again on Apr 6, 2019 17:51:27 GMT 1
its a nice bike and if you want to change a few things to make it your own even better.
as the guys say sort out the brake hoses and i would change the bars but that is up to you.
|
|
|
Post by bid on Apr 6, 2019 21:30:07 GMT 1
cracking she's lovley, 😉
|
|
coroda
L plate rider.
Posts: 10
|
Post by coroda on Jul 24, 2021 11:25:18 GMT 1
Lovely👍
|
|