|
|
Post by gprd on Feb 13, 2019 21:29:15 GMT 1
Has anyone got any pics of the inside of the tacho clock?
I bought a second hand one and it was rattling so I want to see what it's supposed to look like inside.
Cheers
|
|
|
|
Post by JonW on Feb 13, 2019 22:39:33 GMT 1
There is very little in the tacho itself (especially once you remove the temp gauge part), its all very simple.
To be honest if something is loose its going to be obvious, the only bits that move in there are the moving parts of the gauges and nothing that would rattle.
|
|
|
|
Post by gprd on Feb 14, 2019 12:23:06 GMT 1
There is very little in the tacho itself (especially once you remove the temp gauge part), its all very simple. To be honest if something is loose its going to be obvious, the only bits that move in there are the moving parts of the gauges and nothing that would rattle. Ok, cheers. I've had it apart now and it's a funnel type thing thats rattling, and I'm sure it's for the instrument bulb, but it has a definite way round it should go in, a pic would show which way round it should be.
Cheers
|
|
|
|
Post by JonW on Feb 14, 2019 12:34:51 GMT 1
Ahh yes they do drop out of the glue fails, flat side on the inside to reflect the light back to the rim I think.
Edited to add: any Yam (or other) unit will be the same, check on ebay, youtube etc.
|
|
|
|
Post by gprd on Feb 14, 2019 17:22:19 GMT 1
Cheers,
That sounds reasonable.
I'll check the internet for other makes too.
|
|
|
|
Post by dusty350 on Feb 14, 2019 22:00:22 GMT 1
|
|
|
|
Post by gprd on Feb 14, 2019 22:33:36 GMT 1
Bang on, thank you very much.
|
|
