|
Post by rsimark on Apr 28, 2009 21:15:58 GMT 1
got one of these for my bike ready to go on ,once i get a bit further on with restoring it. paid around 100 quid for mine too, think it was from the old parts shop.
|
|
|
Post by andysh2 on May 29, 2009 0:04:06 GMT 1
I've got a carb with 34x and 10 stamped where normally the 12a or 10w is? Also in the inlet side of the carb it has 26 cast into it where my 12a carb has 24 any ideas?
|
|
|
Post by andysh2 on May 29, 2009 0:30:31 GMT 1
Thanks gary any help greatly appreciated, I'm guessing that the 24 and 26 cast into the inlet side of the carb means the size of the carb.
|
|
|
Post by tomitch on May 29, 2009 13:00:57 GMT 1
Yer the 26,24 ect is the size
|
|
|
Post by andysh2 on May 30, 2009 0:16:08 GMT 1
So was the 26 on the 10w bikes then?
|
|
|
Post by tomitch on May 31, 2009 18:36:26 GMT 1
no the 26 was non the tzrs and dt's not sure about the mk3, the 10w bike all had 24mm carbs
|
|
|
Post by racerd on Jun 4, 2009 14:44:29 GMT 1
I've got a carb with 34x and 10 stamped where normally the 12a or 10w is? Also in the inlet side of the carb it has 26 cast into it where my 12a carb has 24 any ideas? 34x carb is the dt ypvs carb
|
|