|
|
Post by dereckerick on Jul 23, 2018 14:06:55 GMT 1
Hi All
Will be fitting rear light some time soon and I need to connect Blue, black yellow connector (original loom) to a red, black, black and white - new rear light
What connects to which, just to save me messing.
Many Thanks
|
|
|
|
Post by earthman on Jul 23, 2018 18:32:12 GMT 1
I take it that the bike is a 4LO and that the new rear light is an aftermarket item?
|
|
|
|
Post by dereckerick on Jul 23, 2018 19:39:29 GMT 1
I take it that the bike is a 4LO and that the new rear light is an aftermarket item? It is indeed a 4L0, a Norbo rear light. I’d probably work it out but I thought I’d ask |
|
|
|
Post by oldelsieboy on Jul 23, 2018 21:45:47 GMT 1
Just look at the bulb holder in each fitting & see where each of the coloured wires terminates.
OEB
|
|
|
|
Post by yamark on Jul 24, 2018 8:06:42 GMT 1
On the LC loom, Yellow is the brake light, Blue is the tail light, Black is the earth.
Find out the earth on the aftermarket light - if I were to guess it would be the black/white, but you should be able to see the colour of the wire that connects to the metal lamp holder. The red and black (if I've guessed correctly) are brake light and tail light.
HTH, Mark |
|
|
|
Post by dereckerick on Jul 24, 2018 8:08:49 GMT 1
On the LC loom, Yellow is the brake light, Blue is the tail light, Black is the earth.
Find out the earth on the aftermarket light - if I were to guess it would be the black/white, but you should be able to see the colour of the wire that connects to the metal lamp holder. The red and black (if I've guessed correctly) are brake light and tail light.
HTH, Mark Saves me messing about with it!!!! Thanks |
|
|
|
Post by yamark on Jul 24, 2018 8:16:29 GMT 1
No worries, PM me if you get stuck (I'm sure you won't) If you have two lengths of wire you can use a battery to connect up the new rear light to work out what does what. |
|
