|
|
Post by ritchic on Jul 6, 2018 16:20:17 GMT 1
Hi can someone give me some advice please. 31k running fine previous to putting pod filters on. Now with filters it is very boggy until 4000revs then revs lovely it has 280 or 290 mains with microns on. What do I need to change as so low down revs
|
|
|
|
Post by Tobyjugs on Jul 6, 2018 17:57:23 GMT 1
I bet it revs like a scolded cat. Think your mains are too small.As for the bogging down bit, difficult to say without more info
|
|
|
|
Post by ritchic on Jul 6, 2018 18:06:14 GMT 1
Oh are they what would you recommend for jet size. What CV other info do you need on it
|
|
|
|
Post by Tobyjugs on Jul 6, 2018 20:32:26 GMT 1
With pod filters i would start 400 main jets, if they are 31K carbs better to be safe than sorry.
What type carbs are they
Other carb info like pilot jets, needle type position of circlip and how many turns out are you pilot air screws for example.
|
|
|
|
Post by ritchic on Jul 6, 2018 20:35:45 GMT 1
Ok I'll get carbs off an see what I've got but I'm sure I set everything else as standard last year but I've slept since then lol
|
|
|
|
Post by ritchic on Jul 7, 2018 20:41:15 GMT 1
So I'm running 250 mains 22.5 pilot middle circlip on needle and 1.5 turns out on mixture screw. Where should I go from there
|
|
|
|
Post by ritchic on Jul 7, 2018 20:45:21 GMT 1
That's the plug  |
|
|
|
Post by dangerousal on Jul 27, 2018 14:58:23 GMT 1
only one?
|
|
|
|
Post by 4l04ever on Aug 3, 2018 9:02:01 GMT 1
Just put the airbox back on! :-)
|
|
|
|
Post by jessy03 on Aug 3, 2018 11:15:13 GMT 1
Just put the airbox back on! :-) + 1 put the air box back on |
|
