|
Post by simon998 on May 3, 2018 14:02:29 GMT 1
I'm having a nightmare finding a good quality RD125LC loom. I can get a new DT125LC loom, do the two wiring diagrams look like they would be difficult to convert it to run on an RD?
|
|
|
Post by Mr Kipling on May 3, 2018 20:11:40 GMT 1
Keep on looking u,d need too add loads of extra wiring , not worth the hassle IMHO..
|
|
|
Post by reedpete on May 3, 2018 21:24:27 GMT 1
Main problems is that the alternator and related charging/ignition system looks quite different ....that will be the show stopper.
|
|
|
Post by simon998 on May 4, 2018 8:38:32 GMT 1
Damn. I was hoping it would be a case of just copying those parts from my old loom over on to the DT loom.
thanks for the responses.
|
|
|
Post by 4l04ever on May 4, 2018 14:08:09 GMT 1
You may also have problems with where the connections are located as they may be just out of reach to connect up.
|
|
|
Post by simon998 on May 4, 2018 15:26:52 GMT 1
You may also have problems with where the connections are located as they may be just out of reach to connect up. Cheers 4lo. I priced everything I need to have a go at fabricating my own loom, up for £70 odds so far, 5m of each coloured cable in the haynes manual wiring diagram should be enough hopefully, it's 70m all together. If I remember correctly; You had blown up, coloured, wiring diagrams? You don't happen to have a 125lc one? This black & white diagram is giving me the fear.
|
|
|
Post by 4l04ever on May 4, 2018 22:37:54 GMT 1
Sorry, only got 4L0 diagram in colour. The early Haynes manuals had colour wiring diagrams, so maybe someone has an old Haynes RD125LC manual with one in?
|
|
|
Post by simon998 on May 5, 2018 8:01:27 GMT 1
Ohh I didn't know the older one had it in. I should have an old tatty copy in the shed somewhere, bought it on ebay like 10 years ago with Norbo's number written in the front page and that's how I found this site lol.
Cheers 4lo
|
|
|
Post by 125lc1dt on May 16, 2018 8:45:42 GMT 1
Where are the new DT looms available from ?
|
|
|
Post by simon998 on May 16, 2018 12:21:39 GMT 1
|
|