|
|
Post by rapidgaz on Nov 20, 2017 0:10:02 GMT 1
Hi folks. Has anyone got a list of the different Main needles and part numbers and wether they are Leaner needles or richer. Cheers folks.
|
|
|
|
Post by rapidgaz on Nov 20, 2017 14:34:11 GMT 1
Anyone. Or am I barking up the wrong tree.
|
|
|
|
Post by muttsnuts on Nov 20, 2017 14:43:51 GMT 1
unfortunately this is a can of worms, believe me, even Allens can't tell you - I've tried many times to find out, it seems the OEM needles don't relate to anything stock, so you have to measure the needles, look at the needle tables and then work it out, and worse still, Mikuni are by far the worst as their needles don't follow any particular pattern/table that I can fathom !
You also need to fazctor in which needle jet you have as that massively affects how a needle works, just to add to the mix !
|
|
|
|
Post by rapidgaz on Nov 20, 2017 15:47:14 GMT 1
😢 dam, and I thought the power of the forum would help. And yikes. I will wait until I come see thee then. Lol it’s a tad rich at mo, so no bother. Cheers dave.
|
|
|
|
Post by rapidgaz on Nov 22, 2017 14:54:04 GMT 1
Himutts. What would the next leaner needle after the 5k1 needle. Or k51. Forgot which way round it is. And would it be ok with p2 emulsion tubes.
Cheers.
|
|
|
|
Post by Tobyjugs on Nov 22, 2017 17:01:50 GMT 1
Do you know where it is running too rich?
I was using the P2 and only noticed it running lean on full throttle
|
|
