|
|
Post by graeme6 on Jun 22, 2017 10:41:25 GMT 1
Hi, got the engine completely stripped and ready to order new bearings. Do I need to order C3 bearings or just standard or does it not matter. Also do the oil seals need to be double lip or standard. Has anyone got a definitive list of what they should be as there seems to be some confusion over which should be fitted or is it just a matter of preference.
|
|
|
|
Post by stusco on Jun 22, 2017 10:57:02 GMT 1
Norbo sells the seals I couldn't see the bearings you could message him he might have them
|
|
|
|
Post by andysh2 on Jun 22, 2017 23:19:02 GMT 1
I just used Koyo or SKF bearings look on ebay each bearing will have an id number on it search for that then pick a decent make, I only struggled with the two needle roller bearings and had to buy genuine Yamaha ones but the others were a lot cheaper on ebay. I just bought a seal kit from ebay to.
|
|
|
|
Post by wonkywheel on Jun 23, 2017 18:20:40 GMT 1
You will need c3 bearings for the crankshaft casings.
|
|
|
|
Post by mudguts on Jun 24, 2017 9:48:11 GMT 1
SKF Explore the needles get off yam dealer, beware of eBay skf fakes, i went to a ind unit skf supplier
6205 c3
6304 c3
6204
6303
6302
6303 z
|
|
|
|
Post by mudguts on Jun 24, 2017 9:50:36 GMT 1
get a seal kit, oil seal kit and threebond 1215 to join the cases
|
|
|
|
Post by graeme6 on Jun 24, 2017 14:13:24 GMT 1
thanks for the info.
|
|
|
|
Post by jollyr6 on Jun 26, 2017 22:08:55 GMT 1
The needles are a yam spec so no one else does them have to be bought from Yamaha
|
|
