samlig
L plate rider.
Posts: 49 
|
Jetting
Apr 19, 2016 22:29:35 GMT 1
via mobile
Post by samlig on Apr 19, 2016 22:29:35 GMT 1
Just bought a job lot of RD125LC parts, mainly for the micron exhaust. What jetting for a Micron exhaust on a 10W engine? Unrestricted. Also anyone know of a good vapour blasting place for the spare carb
|
|
|
|
Jetting
Apr 23, 2016 20:14:44 GMT 1
Post by wonkywheel on Apr 23, 2016 20:14:44 GMT 1
Is the carb a 10w?
|
|
samlig
L plate rider.
Posts: 49
|
Jetting
Apr 24, 2016 11:58:08 GMT 1
via mobile
Post by samlig on Apr 24, 2016 11:58:08 GMT 1
Carbs the unrestricted one, (12a I think)
|
|
|
|
Jetting
Apr 24, 2016 20:23:18 GMT 1
Post by wonkywheel on Apr 24, 2016 20:23:18 GMT 1
12A carb is restricted.
A ledar kit would work well- hard to find these days.
|
|
|
|
Jetting
Apr 25, 2016 10:54:13 GMT 1
Post by Norbo on Apr 25, 2016 10:54:13 GMT 1
with a cron they are hard to jet but id be looking at around 220 mark
|
|
|
|
Jetting
Apr 25, 2016 21:18:15 GMT 1
Post by ozzy on Apr 25, 2016 21:18:15 GMT 1
Ref vapour blasting Tony at aj s motorcycles vapour blasting Hull excellent work, on the net, and face book, top bloke,
Ozzy
|
|
