|
Post by muttsnuts on May 30, 2015 19:32:25 GMT 1
Guys, decided to throw a load of my parts together and make a track bike up for myself for Cadwell this year, got a frame etc, at the moment I think the only thing I am missing is the swinging arm assembly (arm, wishbones, rear shocker etc), I've posted a wanted ad up, but just wondered what alternatives there are out there (not a bike I've buggered about with much from stock), so any suggestions etc would be good
thanks in advance
|
|
|
Post by cb250g5 on May 30, 2015 20:27:59 GMT 1
I run a FZR250 2KR arm in mine. Bolts straight in, has a much better dogbone arrangement, None of the holes in the swinging arm nonsense you get on the F2. Standard bellcrank & custom length dogbones. I use the 17" FZR wheel as well. I doubt they are in great supply, I got a complete rolling chassis, where someone had cut the frame to bits (for no apparent reason) for £50. I run the front end, yokes etc all fit without too much bother, so I've the 17" front with the 300mm single front disk. The 3LN model is much more available, but the parts aren't the same. EDIT. Looks like this: Ebay
|
|