|
|
Post by jorjasfather on Apr 7, 2015 19:44:17 GMT 1
Hi there which way round is the correct way for the head gasket to be fitted because in the Haynes manual on page 52 it show you the gasket on one way then on page 95 diagram 38.7b it show it the other way round
|
|
|
|
Post by looey on Apr 7, 2015 20:40:26 GMT 1
It's a long time since I last had the top end off my 125LC but if my memory serves me right, if you put it on the wrong way around it sticks out at the rear, as the stud holes aren't an equal distance from the front and back ?.
So, P95 by the looks of it.
|
|
|
|
Post by rob99 on Apr 8, 2015 7:37:03 GMT 1
Yes if its on wrong it will stick out
|
|
