|
|
Post by disruptive on Feb 15, 2015 19:48:51 GMT 1
My bike is missing the carb and rear wheel spindle/spacers, is the mk2/3 spindle and spacers the same? And can the carb from any other bikes be used without too much messing about?
|
|
|
|
Post by broughton5 on Feb 15, 2015 20:15:09 GMT 1
not sure about spindles and spacers mate but my mk1 had a 10v carb on from the dt i fitted a 165 main jet ran with a short can micron and it ran great still had the flat spot at 6thou revs but no mid range splutter always do a plug chop thou.
|
|
|
|
Post by jorjasfather on Feb 15, 2015 20:15:26 GMT 1
Hi mate I think the spindle on the mk1,2, and 3 are all the same and the spacers
|
|
|
|
Post by raven13 on Feb 15, 2015 20:33:01 GMT 1
hi dude, sorry I didn't get back to you. cant find the carb anywere, the mk2/3 rear spindle is different.
keep checking on ebay. mk1 parts turn up on a regular basis
|
|
|
|
Post by disruptive on Feb 15, 2015 21:40:40 GMT 1
Dt lc carb? Ahh no worries, will keep an eye out on eBay the carb is the main one for now
|
|
|
|
Post by looey on Feb 15, 2015 22:27:12 GMT 1
Any 125LC carb will do mate, 12A, 10W, 11Y or even off the later models.
Just make sure you get the jetting right for your setup
|
|
|
|
Post by museumman on Mar 4, 2015 13:18:11 GMT 1
The MK2/3 rear spindle is a tad longer as the swing-arm is thicker in the chain adjuster area.
|
|
