|
Post by ozzy on Nov 13, 2007 21:07:24 GMT 1
any parts about what ya got what ya want... ;D cheers oz.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 13, 2007 23:40:56 GMT 1
have a few parts, some very rare too;
complete front brake reservoir (needs a new lever though) front mudguard holder (very very VERY rare, rocking horse shit) polished rear brake plate (with new shoes) various engine mounting bolts front wheel spindle (with speedo drive and washers) top yoke temp sender (again rare) slightly damaged rear sprocket holder (needs seal + bearing) yeis chamber and pipe (rare) oil pump (no large washer or shims) 2X reed blocks (one with hytech's + spare standard metal reeds) one very worn/cracked reed block rubber rear light holder (no bulb or lens) loads of nuts and bolts (OE) (inc 3 cylinder head bolts, rare) standard front sprocket with locking holder and bolts (possible belly pan if i can locate it, mums garage i think) (cut off rear mudguard i have an uncut one on bike have to see which looks best when finished)
chromed: front light surround clock holder bracket* rear brake lever (the one that actuates the drum)* left foot bracket (with foot pedal)* right foot bracket (with pedal NO brake lever)*
(* already got a possible buyer)
there may be more BUT until the project is fully finished, running and had its mot and first few hundred miles on clock, nothing is going case i need them. then and only then will i sell all to fund the tzr50r project. at least you will know i have this stuff though OK, thanks Jamie.
|
|
|
Post by ozzy on Nov 14, 2007 17:59:06 GMT 1
ok mate give me a pm price posted on ........... belly pan,sender,reed blocks,engine bolts/nuts,yeis chamber/pipe for now. cheers , OZ.
|
|
|
Post by Norbo on Nov 14, 2007 19:24:07 GMT 1
I have loads of new stuff. They are all listed on my wanted forsale page on the main site
|
|
|
Post by ozzy on Nov 15, 2007 12:11:30 GMT 1
yes has been noted norb mate not ready yet for them parts mate but will be in touch. cheers.oz
|
|
|
Post by ozzy on Nov 15, 2007 12:12:46 GMT 1
a fairing would be nice though.............: )
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 15, 2007 17:46:12 GMT 1
ok mate give me a pm price posted on ........... belly pan,sender,reed blocks,engine bolts/nuts,yeis chamber/pipe for now. cheers , OZ. give me time to sort the stuff out (esp the nuts and bolts) and i'll try to get a picture for you OK.
|
|
|
Post by ozzy on Nov 15, 2007 23:35:59 GMT 1
ok J CHEERS no rush as and when
|
|