|
|
Post by george on Sept 6, 2014 22:35:16 GMT 1
Evening, after purchasing a mk2 125 to keep my 350 lc company I am starting to sort out a few little problems it has... Having spent a few hours cleaning and re jetting the carb it now runs beautifully. The last problem is that the indicators don't flash unless you rev the bike... It's got a brand new battery on but still you have to hold the revs at around 3/4k before the indicators flash as they should if not they just stick on or off. Any ideas?? Many thanks
|
|
|
|
Post by broughton5 on Sept 7, 2014 13:45:53 GMT 1
try unplugging one of the earthing wires that connect to the loom on the front indicators and earth it elsewhere like the pinch bolts or something similar see if this helps i had same prob and now i have a permanent earth from one of the pinch bolts and everything is fine hope this helps.
|
|
|
|
Post by yamfan on Oct 6, 2014 22:23:40 GMT 1
try unplugging one of the earthing wires that connect to the loom on the front indicators and earth it elsewhere like the pinch bolts or something similar see if this helps i had same prob and now i have a permanent earth from one of the pinch bolts and everything is fine hope this helps. Totally agree there mate, sounds like a bad earth to me too |
|
|
|
Post by jackjoe on Oct 7, 2014 18:26:15 GMT 1
I think you will find its the bulbs can be different watt bulbs in indicators or wrong watts for the flasher
|
|
