|
|
Post by jackjoe on Jun 23, 2014 8:47:19 GMT 1
hi got problems with my boys bike I know its the carb and have cleaned all the jets and air intakes float intake but it has not fix it a I missing something cheers
|
|
|
|
Post by yamark on Jun 23, 2014 18:16:24 GMT 1
What is the problem? Easier to then diagnose. Cheers
|
|
|
|
Post by raven13 on Jun 23, 2014 20:58:19 GMT 1
did you remove the emulsion tube?if not unscrew the main jet and push it out fron the inside of the carb, probly find a bucket load of crud when you do
|
|
|
|
Post by jackjoe on Jun 24, 2014 6:53:18 GMT 1
did you remove the emulsion tube?if not unscrew the main jet and push it out fron the inside of the carb, probly find a bucket load of crud when you do thanks will try that and to answer first question the bike is holding back and it is the carb |
|
|
|
Post by yamark on Jun 24, 2014 7:34:37 GMT 1
I agree with raven 13, check emulsion tube, . Take great care as it's easily damaged. then look at needle clip position. It's best if the carb is ultrasonically cleaned. HTH
|
|
|
|
Post by jackjoe on Jun 24, 2014 19:15:52 GMT 1
I got one of them will try thanks
|
|
