|
|
Post by rob99 on May 8, 2014 17:21:34 GMT 1
Ive managed to get fluid down to the bleed nipple and alot of air out the top but ive still no pressure on the lever
There are no obvious signs of a leak
Any help appreciated
|
|
|
|
Post by raven13 on May 8, 2014 18:20:32 GMT 1
sounds like master cylinder needs an overhaul
|
|
|
|
Post by eddie1969 on May 9, 2014 17:06:10 GMT 1
Hi,
Does sound like master cilinder but you can try one thing,
Sometimes there is air behind the cups ,you can leave it standing for one night with a cable tie on the brake handle
Make sure to take filler cap off
If this does not work try to unscrew adjusting bolt on handle,when it is in too deep the brake fluid cannot go back to master cilinder
Good luck with it
|
|
